_ DEC-O-LOG for DN200

_ DOL, DN200-R0004, DMR11-AD JUL 84

PROBLEM: An update to the DMR11-AD  specification indictes a possible 
overload of the +5v Regulators under the maximum configuration.
2. Due to the NPR latency the DNSXX-AB 9DMC11) must preceed the 
DMR11-AD on the Unibus when used in a high speed sychronous 
configuration. 

CORRECTION: Re-distribute the load by re-arranging the Module 
Utilization.  In a fixed configuration the DNSXX-AB (DMC11) requires 
placement ahead of the DMR11-A on the Unibus. 

IN-PLANT EFFECTIVITY: Feb 83 

FIELD EFFECTIVITY: Re-arrange Module Utilization. Refer to the following 
configurations: #1. Basic DN200 drawer fully expanded. #2. Basic DN200 
drawer fully expanded special configuration with LP20. #3. Basic DN200 
drawer fully expanded special configuration with DN20-BA. #4. Maximium 
System expansion with no special configuration. 

QUICK CHECK: Check the Module Utilization and compare configurations 
per instructions in the FCO. 

The DEC on-site labor charge will be the time required to install and test
the FCO at the then current hourly rate.

FCO KIT ORDERING:


FA-04548-01: FCO only