_ FCO TU78-I030, Second fuse block in power pack ----------------------------------------------------------------------------| | _ _ _ _ _ _ _ | | | | | | | | | | Level of Page 1 | | |d|i|g|i|t|a|l| Urgency Of 2 | | |_|_|_|_|_|_|_| FCO [ I ] | |___________________________________________________________________________| | FIELD CHANGE ORDER Number: TU78-I030 | |___________________________________________________________________________| | Applicability: | | Rework all TU78's without a second fuse block in the power pack. | | Please note, this is an LOU Code "I" FCO. | | | | Complete installation procedure is included in the EQ Kit | | This is recommended for Depot installation only. | |___________________________________________________________________________| | *****NOTE***** | | Installation by Field Personnel is not recommended. If necessary, it | | should be installed by fully trained TU/TA78 Technicians ONLY. | | Installation by non-trained Personnel could result in excessive | | labor or damage. | |___________________________________________________________________________| | Quick Check: | | Second Fuse Holder mounted in Power Pack contains F9 thru F14. | | | |___________________________________________________________________________| | Compatibility/Prerequisite FCO: | Est. Time to Install | | TU78-R0026, TU78-R0029 | 2.0 Hours | |___________________________________________________|_______________________| | Special Tools or Test Equipment: | | None | |___________________________________________________________________________| | FCO Parts Information | |___________________________________________________________________________| | Order by | Contents | | FCO Kit # |____________________________________________________________| | | Quantity Part Number Description | | | | | EQ-01396-01 | 1 29-25589-00 Fuse Replacement Kit | | | | | FA-04677-01 | 1 FCO Document | | | | |______________|____________________________________________________________| | EQ Kit Variation/System-Option Applic: N/A | |___________________________________________________________________________| | Approvals | |___________________________________________________________________________| | CSSE Engineer |F.S. Product Safety | F.S. Logistics | | Robert Steere | John Freudenberg | Ed Duggan | |________________________|_________________________|________________________| | Responsible CSSE Mgr |F.S. Microfiche Libraries| Affected Population | | Steve Dail | | 6000 | |________________________| PDP-11 |_______________________ | | ESD&P Micropublishing | LCG | Initial Kitting | | Barbara Eriss | | 100 | |________________________| VAXnotes |_______________________ | | Revision | STARS | Hardcopy Publication | | A | | 500 | |________________________| |________________________| | FCO Release Date | | Parts Availability | | 20 December 1985 | | February 1986 | +---------------------------------------------------------------------------+ _ _ _ _ _ _ _ | FCO TU78-I-030 | | | | | | | | | |d|i|g|i|t|a|l| | PAGE 2 OF 2 |_|_|_|_|_|_|_| | | _______________________________|_________________________________________ REWORK INSTRUCTIONS FOR FCO TU78-I-030 *********************************************************************** * N O T E * * * * o Before starting this procedure, power the Transport OFF by * * placing the CB1 in the Drive Power back to the "OFF" position. * * * * o Remove the AC Plug from the Power Pack Receptacle. * * * * o For references to parts in the text, refer to Figure 2 in the * * Fuse Replacement Kit Installation Instructions included in the * * EQ Kit. * * * * o Run one pass of the diagnostic EVMAA. * *********************************************************************** \^ TU78 \\TU78 \\STEERE \\1985 \\DEC \\FCO_DOCS