_ FCO 85XBA-R006, Retrofit VAX 85xx systems to rev "E1" +-----------------------------------------------------------------------------+ | | | _ _ _ _ _ _ _ Level of Urgency Page_1_ | || | | | | | | | +--+ Of_4_ | ||d|i|g|i|t|a|l| FCO | R| | ||_|_|_|_|_|_|_| +--+ | |_____________________________________________________________________________| | | | FIELD CHANGE ORDER Number: FCO 85XBA-R006 | |_____________________________________________________________________________| | Applicability: Retrofit all VAX 85XX systems to Revision Level "E1". | | This FCO incorporates the following ECO: | | BT-ZMAAD-C3-LK002 - (New Part Rev V22E) | | | |_____________________________________________________________________________| | Problem/Symptom: See page 2 | | | |_____________________________________________________________________________| | Quick Check: Console will show V5.0 | | | | | |_____________________________________________________________________________| | Compatibility/Prerequisite FCO: | Est. Time to Install: | | See FCO Summary Chart on page 4. | 3.0 hours | |-----------------------------------------------------------------------------| | Special Tools or Test Equipment: N/A | | | |_____________________________________________________________________________| | FCO Parts Information | |_____________________________________________________________________________| | Order by Quantity: Part Number: Description: | | FCO Kit#: | | | | EQ-01487-01 1 74-31904-09 Letter "3" | | FA-04779-03 1 FCO Document | |_____________________________________________________________________________| |EQ Kit Variation System/Option Applic: N/A | |_____________________________________________________________________________| | Approvals | |_____________________________________________________________________________| | CSSE Engineer | F.S. Product Safety | F.S. Logistics | | Jim Powers | Bob Brister | Ed Duggan | |____________________|__________________________|_____________________________| | CSSE Manager | F.S. Microfiche Libraries| Affected Population: | | Jan Sicard | | 1,633 | |____________________| EP-FSNVX-LB VAX |____________________________ | | MicroMedia Pub | | Initial Kitting: | | Ray LeBlanc | VAXnotes | 1,633 | |____________________| STARS |____________________________ | | Revision: | | Hardcopy Publication: | | A | | 1,800 | |____________________| |_____________________________| | FCO Release Date | | Parts Availability: | | 10-JUL-87 | | July 1987 | +-----------------------------------------------------------------------------+ _ _ _ _ _ _ _ | FCO 85XBA-R006 | | | | | | | | | |d|i|g|i|t|a|l| | PAGE 2 OF 4 |_|_|_|_|_|_|_| | | _______________________________|_________________________________________ Applicability and Problem/Symptom cont. from page 1 --------------------------------------------------- This FCO contains the following ECOs: BT-ZMAAD-C3-LK002 - (New part rev V22E) 1. Remote Port fix to correct loss of characters and "Disable Local Console" command. 2. The commands I, U, and START cannot be initiated unless the machine is halted. 3. The entire word TEST must be typed to invoke micro diagnostics. 4. System may crash when the PRO is powered off. This fix needs Console Rev "22E" and VMS V4.6. 5. The NBIB may log a "Read Retry Timeout" error when two other devices capable of Interlock instructions are on the same BI. This problem is fixed with a change to the CPU microcode. EQ KIT - N/A ------------ Rev "22E" and the Read Retry Microcode will NOT be available via EQ Kits. If needed, additional copies of Console Rev "22E" can be ordered from SDC (part number is ZM920). FIELD INSTALLATION AND TEST PROCEDURE FOR FCO 85XBA-R006 ---------------------------------------------------------- 1. Shut down the system by executing the Shutdown Command Procedure. $ @SYS$SYSTEM:SHUTDOWN After VMS shuts down, type CTRL^P HALT.... you will now be in the console mode. The prompt is ">>>" 2. Using the 8500/8550 console commands, power the 8500/8550 off. >>>POWER OFF (CR) _ _ _ _ _ _ _ | FCO 85XBA-R006 | | | | | | | | | |d|i|g|i|t|a|l| | PAGE 3 OF 4 |_|_|_|_|_|_|_| | | _______________________________|_________________________________________ 3. ********************************************************* * NOTE * * * * Read the Console Release Notes carefully and follow * * the instructions for building a new console. These * * Console Release Notes are included with every set of * * Console media. * * * ********************************************************* 4. The console upgrade procedure does not include instructions for reloading the diagnostics onto the console hard disk. If this is desired, copy the files using the copy command as demonstrated in the "VAX DIAGNOSTIC SUPERVISOR AND DISK FORMATTER INSTALLATION" section of the Console Release Notes. 5. Power up the CPU by typing the following command: >>>POWER ON 6. Remove the first zero from the 8500 logo on the front of the machine and replace it with the letter 3 from EQ-01487-01. The logo will now read "8530". 7. Bring up the VMS Operating System and run UETP. 8. Update the Site Management Guide to reflect this FCO. 9. Report this FCO activity on the LARS form in the "Fail Area/ Module/FCO/Comments" column as follows: FCO 85XBA-R006. --------------------------------------------------------------------------- LARS USA GIA EUR Activity - Contract and Warranty W or U Y Non Contract/Non Warranty F U F DEC Option 85XBA 85XBA 85XBA Type of Call M M M Action Taken D D I Fail Area-Module-FCO-Comments 85XBA-R006 85XBA-R006 85XBA-R006 Material Used N/A N/A N/A _ _ _ _ _ _ _ | FCO 85XBA-R006 | | | | | | | | | |d|i|g|i|t|a|l| | PAGE 4 OF 4 |_|_|_|_|_|_|_| | | _______________________________|_________________________________________ FCO History Chart ----------------- 85XBA B1 C1 D1 E1 ----- -- -- -- -- FCO 85XBA-R001 FCO 85XBA-I002 FCO 85XBA-I003 FCO 85XBA-R006 F1001 Rev F F1010 Rev B H7176 Rev C2 Console V22E (5) F1005 Rev B FCO 85XBA-I004 H7061 REV B1 FCO 85XBA-R005 (Temp Sensor) \^ 85XBA \\85XBA \\POWERS \\1987 \\JUL \\FCO_DOCS