_ DEC-O-LOG for KA48 _ DOL, KA48-F001, Bugs in ROM code Aug 92 PROBLEM: The following bugs wre found in the ROM code in the VAXstation 4000 Model VLC ROM version V1.2. 1. Halt value returns to default settings after a power cycle (system will not automatically reboot if halt button has been used). 2. Tablet and stylus do not work. 3. SCSI devices not seen after self-test failure (system will be powered off and on to see the fixed drive). 4. TSZ07 self-test failure and possible undetected data loss. 5. Keyboard selection not used on power-up (only the US keyboard selection works). FIELD EFFECTIVITY: This FCO is for the VAXstation 4000 model VLC. SOLUTION: Replace the version V1.1 base system ROMs on the VAXstation 4000 model 60 with V1.2 base systems ROMs. QUICK CHECK: With the system in console mode, you can type "SHO CONF". The top line on the VAXstation 4000 model VLC should be (KA48-A V1.3-343-V4.0). Look for V1.3. If the system BSR revision is lower; then this FCO should be installed. The DEC on-site labor charge will be the time required to install and test the FCO at the then current hourly rate. FCO KIT ORDERING EQ-01650-01 23-201E8-00 23-202E8-00 ROMs Model VLC FA-04986-01 FA Document