_ DEC-O-LOG for KZMSA

_ DOL, KZMSA-F001, T2029-AB module

MAY 93 

PROBLEM:   Any T2029-AB module below rev. "F" 
will not allow the functions microcode to be updated at 
the customer site.  There is also a "disconnect" prob
lem.

FIELD EFFECTIVITY:   This "F" coded FCO should 
be installed on all DEC 7610, 7620, 7630, and 7640 
systems.  This FCO will bring all KZMSAs (T2029-AB) 
to rev. "F01" or greater.  All field spares should also be 
upgraded with this FCO.  This FCO incorporates the 
following ECO:  T2029-AB-LTN02. 

SOLUTION:  The FCO corrects the problems by:                                                         
1).  Replacing the PAL in location E110 with new PAL, 
23-E89J5-00 and 2). Replacing the EPROM in location 
E7 with a new EPROM, 23-368E9-00.  This will allow 
the field to upgrade the code on site vs. changing the 
module in the future.

QUICK CHECK:   Check revision of the T2029-AB 
module for rev. "F*"

FCO KIT ORDERING
EQ-01674-01	T2029-AB KZMSA Module,     
                                        rev. "F*"

FA-05010-01	FCO Document