_ DEC-O-LOG for LN08 _ DOL, LN08-O001, Printers exhibit light/no printing JAN 93 APPLICABILITY: This "O" FCO should be performed on all the applicable dash variations of the LN08's and LN08R's. For example: LN08-CA and LN08R-CA, and similarly for -AD, -AE, -AG, -AI, -AS, -AT, -AZ, -CB, -CC, and -CD. There are a total of 123 of the 110V units, and 68 of the 220V units that need the FCO. They are identified by their serial numbers given in the attached Product Correction Order (PCO) document. [The PCO is considered to be an integral part of this FA document.] PROBLEM & SYMPTOM: The problem printers exhibit light/no printing as identified in the Field Blitz: TD # 1058, issued on/around April 1992. SOLUTION: Determine if the customer's LN08 (DEClaser 3200 or 3250) printer is the affected printer by checking the serial number on the pop-up cover as shown on Tag 2 on pp 1-8 of the accompanying Product Correction Order (PCO), and matching it with that given in Tables 1-1/1-2 on pp 1-9. Then follow the instructions in the PCO to correct the problem. FCO KIT ORDERING: EQ-01654-01 This FA document w/PCO addendum FA-04990-01 Field Application (FA) Document _ DOL, LN08-F002, Printers exhibit minor software bugs JAN 93 APPLICABILITY: This "F" FCO should be performed on all the applicable dash variations of the LN08's and LN08R's. For example: LN08-CA and LN08R-CA, and similarly for -AD, -AE, -AG, -AI, -AS, -AT, -AZ, -CB, -CC, and -CD. There are a total of 194 of the 110V units, and 106 of the 220V units that need the FCO. They are identified by their serial numbers given in the attached tables. PROBLEM & SYMPTOM: The problem printers exhibit minor software bugs and do not support the MMF accessory as indicated in the ECO # 2929308-DSG001, issued on/around 24th April 1992. SOLUTION: Determine if the customer's LN08 (DEClaser 3200 or 3250) printer is the affected printer by checking the serial number on the pop-up cover and matching it with the accompanying serial no. tables given in this document. Then follow the instructions given in the *Microfiched hardcopy* of the ECO. FCO KIT ORDERING: EQ-01653-01 1 set of 4 EPROM V1.1 chips; DEC P/N: 29-30222-01.A01 FA-04989-01 FCO Document _ DOL, LN08-F003, Slow PostScript printing MAY 94 APPLICABILITY: This "F" coded FCO should be performed on all variations of DEClaser 3250's LN08-R and LN08-Us that have PostScript firmware below version 47-58. There are approximately 3,466 DEClaser 3250s that require this FCO. This FCO will upgrade the PostScript Description Language Option (PDL) Board's firmware to PostScript version 47-58. PROBLEM & SYMPTOM: (1.) Fixes slow PostScript printing due to memory fragmentation. (2.) This FCO also upgrades PostScript firmware to version 47-58. SOLUTION: By following the instructions included with this FCO, you will replace four PostScript EPROMs on the DEClaser 3250 PDL board. QUICK CHECK: This FCO does not need to be installed if the DEClaser 3250 PDL board PostScript firmware is at least Version 47-58. Check the DEClaser 3250 powerup test page. FCO KIT ORDERING: EQ-01684-01 4 - PostScript EPROMs Version 47-58 FA-05201-01 1 - Field Applicability Document (FA)