VAXstation 4000 Model 90 Series ------------------------------------------------------------ Owner 's and System Installation Guide Order Number: EK-VAXOG-IN. B01 Digital Equipment Corporation Maynard, Massachusetts ------------------------------------------------------------ First Printing, August 1992 Second Printing, March 1994 Digital Equipment Corporation makes no representations that the use of its products in the manner described in this publication will not infringe on existing or future patent rights, nor do the descriptions contained in this publication imply the granting of licenses to make, use, or sell equipment or software in accordance with the description. © Digital Equipment Corporation March 1994. All Rights Reserved. The postpaid Reader 's Comments form at the end of this document requests your critical evaluation to assist in preparing future documentation. The following are trademarks of Digital Equipment Corporation: DEC, DECconnect, DECwindows, ThinWire, RX, VAX, VAXstation, OpenVMS, and the DIGITAL logo. S2530 This document is available on CDROM. This document was prepared using VAX DOCUMENT Version 2.1. ------------------------------------------------------------ Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi 1 Your VAXstation 4000 Model 90 System Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Chapter Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 System Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Overview of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 The VAXstation 4000 Model 90 System . . . . . . . . . . . . . . . . . 1-2 System Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Components Shipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 System Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Front of System Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Front Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 Back of System Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 Component Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 Available Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9 Ordering Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11 Installing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11 2 Installing Your VAXstation 4000 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Chapter Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Installing Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Assemble the T-connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Attach the Loopback and T-connector . . . . . . . . . . . . . . . . . . 2-3 Connect the Mouse and Keyboard . . . . . . . . . . . . . . . . . . . . . 2-4 Attach the Monitor Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Recommended Power Source . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Universal Strain Relief Strap . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 iii Attach the Monitor Video Cable . . . . . . . . . . . . . . . . . . . . . . . 2-7 Video In/Video Out Connectors . . . . . . . . . . . . . . . . . . . . . . . . 2-7 Attach the Monitor Power Cord . . . . . . . . . . . . . . . . . . . . . . . 2-8 Factory Installed Software Sticker . . . . . . . . . . . . . . . . . . . . . 2-9 Connect the System Power Cord . . . . . . . . . . . . . . . . . . . . . . 2-10 Turn On ( | ) Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11 Successful Start-Up Display . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12 Putting Your System in Console Mode . . . . . . . . . . . . . . . . . . . . . 2-13 Console Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 Halt Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 Recording Information About Your System . . . . . . . . . . . . . . . . . 2-14 Why Record Information? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14 Where to Find Information . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14 Attaching the Network Label . . . . . . . . . . . . . . . . . . . . . . . . . 2-16 3 Connecting Your System to the Network Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Chapter Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Verifying the Ethernet Subsystem . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Steps to Verify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Connecting to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Connecting to Standard Ethernet . . . . . . . . . . . . . . . . . . . . . 3-3 Connecting to ThinWire Ethernet . . . . . . . . . . . . . . . . . . . . . 3-5 Verifying the Ethernet Connection . . . . . . . . . . . . . . . . . . . . . . . . 3-8 Verify Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8 Removing a System from ThinWire Ethernet . . . . . . . . . . . . . . . . 3-9 Caution: Follow Shutdown Procedures . . . . . . . . . . . . . . . . . 3-9 Removal Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9 4 Using Your System Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Chapter Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Turning Your Workstation On and Off . . . . . . . . . . . . . . . . . . . . . 4-2 Turning On the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Turning On Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Adjusting Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Turning Your System Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Starting Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Enter the Boot Command . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Reviewing Your System Configuration . . . . . . . . . . . . . . . . . . . . . 4-3 Console Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 iv The SHOW CONFIG Command . . . . . . . . . . . . . . . . . . . . . . . 4-3 Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Using Console Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 Using HELP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 SHOW Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 SET Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8 TEST Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8 Using the Password Security Feature . . . . . . . . . . . . . . . . . . . . . 4-9 Restricted Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9 Privileged Console Commands . . . . . . . . . . . . . . . . . . . . . . . . 4-9 Nonprivileged Console Commands . . . . . . . . . . . . . . . . . . . . . 4-10 Choosing a Security Password . . . . . . . . . . . . . . . . . . . . . . . . 4-10 Setting Your Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 Enabling the Security Feature . . . . . . . . . . . . . . . . . . . . . . . . 4-11 Disabling the Security Feature . . . . . . . . . . . . . . . . . . . . . . . 4-11 Changing the Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11 Moving Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Shutting Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Turning Off the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Packing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Reconnecting Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 5 Testing System Components Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Chapter Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Interpreting System Start-Up Displays . . . . . . . . . . . . . . . . . . . . 5-1 Start-Up Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Start-Up Display with Error Message . . . . . . . . . . . . . . . . . . 5-2 ! The ID Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 " and # The Faulty Component . . . . . . . . . . . . . . . . . . . . . . 5-4 $ The Error Message Number . . . . . . . . . . . . . . . . . . . . . . . . 5-5 Interpreting Diagnostic Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Where the Lights Are . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 What the Lights Mean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Testing System Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 Testing a Single Component . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 Testing Several Components . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 Testing All Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 Testing All Components Simultaneously . . . . . . . . . . . . . . . . 5-9 Using the System Exerciser . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10 v Interrupting the System Exerciser . . . . . . . . . . . . . . . . . . . . . 5-11 Successful Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12 Unsuccessful Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13 Requesting a Test Summary . . . . . . . . . . . . . . . . . . . . . . . . . 5-14 Requesting No Test Summary Display . . . . . . . . . . . . . . . . . . 5-15 After Any Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15 Resuming Normal Operation After Testing . . . . . . . . . . . . . . . . . 5-15 Two Ways to Reboot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15 Device Mnemonic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16 Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16 6 Handling Problems Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Chapter Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Checking Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Shut Down the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Check Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Turn System Back On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 Troubleshooting System Components . . . . . . . . . . . . . . . . . . . . . . 6-3 Troubleshooting Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 System Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4 Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5 Mouse/Tablet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6 Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6 Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 Reporting Problems to Your Digital Service Representative . . . . . 6-8 Before You Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8 A Alternate Start-Up Procedures Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Appendix Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Changing the Keyboard Language . . . . . . . . . . . . . . . . . . . . . . . . A-2 Turning Off Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 Steps to Change Keyboard Language . . . . . . . . . . . . . . . . . . . A-2 Setting the Default Boot Device . . . . . . . . . . . . . . . . . . . . . . . . . . A-3 The Default Boot Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3 Changing the Boot Device . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3 Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4 Short-Cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4 Changing the Default Recovery Action . . . . . . . . . . . . . . . . . . . . . A-4 vi Default Recovery Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4 Changing Default Recovery Action . . . . . . . . . . . . . . . . . . . . . A-5 Setting the Default Boot Flags . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6 Who Should Set the Boot Flag . . . . . . . . . . . . . . . . . . . . . . . . A-6 Setting the Boot Flag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6 Using the Alternate Console Feature . . . . . . . . . . . . . . . . . . . . . . A-6 If Monitor Screen Is Blank . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6 Connecting a Terminal as an Alternate Console . . . . . . . . . . A-7 B DSW21 Synchronous Communications Adapter Installation Information for the United Kingdom Appendix Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1 Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1 Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1 Safety Warning Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2 Equipment Between the DSW21 Adapter and a Digital Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2 Equipment Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2 Host Power Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3 Module Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3 Approved Service Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . B-4 UK Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4 BABT Host-Independent Approvals . . . . . . . . . . . . . . . . . . . . . . . B-5 Approval Criteria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5 Clearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6 Checking Creepage Distances . . . . . . . . . . . . . . . . . . . . . . . . B-7 Warning: Approval Invalidated . . . . . . . . . . . . . . . . . . . . . . . B-7 C Model 90 System Specifications Appendix Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1 System Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2 Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2 General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-3 Storage Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-4 Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-4 Nonoperating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-4 vii Index Figures 1-1 Your VAXstation 4000 Model 90 System . . . . . . . . . . . . . . . . 1-2 1-2 System Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 1-3 Front of System Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 1-4 Back of System Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 2-1 Assembling the T-connector . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 2-2 Attaching the Loopback and T-connector . . . . . . . . . . . . . . . . 2-3 2-3 Connecting the Mouse and Keyboard . . . . . . . . . . . . . . . . . . . 2-4 2-4 Attaching the Monitor Cable . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 2-5 Attaching the Universal Strain Relief Strap . . . . . . . . . . . . . 2-6 2-6 Attaching the Monitor Cable to the Monitor . . . . . . . . . . . . . 2-7 2-7 Attaching the Monitor Power Cord . . . . . . . . . . . . . . . . . . . . 2-8 2-8 OpenVMS Factory Installed Software Sticker . . . . . . . . . . . . 2-9 2-9 Attaching the System Power Cord . . . . . . . . . . . . . . . . . . . . . 2-10 2-10 On/Off Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11 2-11 Successful Start-Up Display . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12 2-12 Press Halt Button for Console Mode . . . . . . . . . . . . . . . . . . . 2-13 2-13 Attaching the Network Label . . . . . . . . . . . . . . . . . . . . . . . . . 2-16 3-1 Start-Up Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 3-2 Network Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 3-3 Ethernet Cable in Ethernet Port . . . . . . . . . . . . . . . . . . . . . . 3-5 3-4 Adding ThinWire Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 3-5 Reconnecting ThinWire Cable . . . . . . . . . . . . . . . . . . . . . . . . 3-6 3-6 Connecting to the DECconnect Faceplate . . . . . . . . . . . . . . . . 3-7 3-7 Removing the T-connector from the System . . . . . . . . . . . . . . 3-9 4-1 SHOW CONFIG Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 4-2 SHOW CONFIG Display with Error . . . . . . . . . . . . . . . . . . . 4-6 5-1 Start-Up Display with Error Message . . . . . . . . . . . . . . . . . . 5-2 5-2 Diagnostic Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 5-3 Successful System Exerciser Test . . . . . . . . . . . . . . . . . . . . . . 5-12 5-4 System Exerciser Display with an Error Line . . . . . . . . . . . . 5-13 5-5 Test Summary Display With Error . . . . . . . . . . . . . . . . . . . . . 5-14 A-1 Changing the Keyboard Language . . . . . . . . . . . . . . . . . . . . . A-2 B-1 Creepage Distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-7 viii Tables 1-1 Components: Front of System Unit . . . . . . . . . . . . . . . . . . . . 1-6 1-2 Components: Back of System Unit . . . . . . . . . . . . . . . . . . . . 1-8 1-3 VAXstation 4000 Devices and Options . . . . . . . . . . . . . . . . . . 1-10 2-1 Installation Steps for Your VAXstation 4000 Model 90 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 2-2 Your System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14 4-1 Graphics Board Mnemonics . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 4-2 SHOW Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 4-3 SET Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8 4-4 TEST Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8 4-5 Nonprivileged Console Commands . . . . . . . . . . . . . . . . . . . . . 4-10 4-6 Setting Your Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 4-7 Enabling the Password Security Feature . . . . . . . . . . . . . . . . 4-11 4-8 Disabling the Password Security Feature . . . . . . . . . . . . . . . 4-11 4-9 Changing Your Console Password . . . . . . . . . . . . . . . . . . . . . 4-11 5-1 ID Numbers and Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 5-2 Component Numbers and Mnemonics . . . . . . . . . . . . . . . . . . 5-4 5-3 Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 5-4 Diagnostic Light Patterns of Common Problems . . . . . . . . . . 5-7 5-5 OpenVMS Device Mnemonic . . . . . . . . . . . . . . . . . . . . . . . . . 5-16 6-1 Problems with the System Unit . . . . . . . . . . . . . . . . . . . . . . . 6-4 6-2 Problems with the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5 6-3 Problems with the Mouse or Tablet . . . . . . . . . . . . . . . . . . . . 6-6 6-4 Problems with the Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . 6-6 6-5 Problems with the Network . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 6-6 Audio Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 A-1 OpenVMS Device Mnemonic . . . . . . . . . . . . . . . . . . . . . . . . . A-3 A-2 Values for Recovery Action . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4 B-1 Module Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3 B-2 BABT Approved Service Specifications for the DSW21 Synchronous Communications Adapter for UK Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4 B-3 Clearance and Creepage Distances . . . . . . . . . . . . . . . . . . . . B-6 C-1 System Unit Dimensions (Diskless System) . . . . . . . . . . . . . . C-2 C-2 System Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . C-2 C-3 System Component Specifications . . . . . . . . . . . . . . . . . . . . . C-3 ix C-4 System Storage Specifications . . . . . . . . . . . . . . . . . . . . . . . . C-4 C-5 VAXstation 4000 Operating Conditions . . . . . . . . . . . . . . . . . C-4 C-6 VAXstation 4000 Nonoperating Conditions . . . . . . . . . . . . . . C-4 x ------------------------------------------------------------ Preface Purpose This guide describes how to install, use, and troubleshoot the hardware components of a VAXstation 4000 Model 90 system. This guide also includes information on how to connect your system to an Ethernet network. Intended Audience This guide is for anyone installing and using the VAXstation 4000 Model 90 workstation. Structure This guide contains six chapters, three appendixes, and an index. It is organized as follows: · Chapter 1 provides an overview of the Model 90 workstation. It introduces you to some of the features and options available. · Chapter 2 explains how to install the standalone system, run system start-up tests, and record information about your system. · Chapter 3 explains how to connect your system to a ThinWire Ethernet network or to a standard Ethernet network. · Chapter 4 tells you how to use your system, including how to start up and turn off your system, display the system configuration, use commands in console mode, and how to set up the console security feature. · Chapter 5 explains how to perform and interpret system tests, and how to reboot your system after testing. · Chapter 6 provides basic information to help you diagnose and solve problems. xi · Appendix A tells you how to set alternate startup procedures, including how to reboot your system and change the default recovery action. It also describes how to change your keyboard language setting. · Appendix B includes installation information that is applicable to the United Kingdom. · Appendix C provides hardware specifications for system components. Conventions The following conventions are used in this guide: ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ A key name is shown enclosed to indicate that you press a named key on the keyboard. ------------------------------------------------------------ ------------------------------------------------------------ Ctrl/x ------------------------------------------------------------ ------------------------------------------------------------ A sequence such as ------------------------------------------------------------ ------------------------------------------------------------ Ctrl/x ------------------------------------------------------------ ------------------------------------------------------------ indicates that you must hold down the key labeled Ctrl while you press another key or a pointing device button. bold Bold type in examples indicates information that you must enter at the keyboard. italics Italics indicate important information, a document title, or variables. WARNING: Warnings contain information to prevent personal injury. Read these carefully. CAUTION: Cautions provide information to prevent damage to equipment or software. Read these carefully. xii 1 ------------------------------------------------------------ Your VAXstation 4000 Model 90 System Introduction This chapter provides an overview of the Model 90 workstation. It introduces you to the features and available options. Chapter Topics This chapter describes the VAXstation 4000 Model 90 system: · System Capabilities · System Components · Available Options ------------------------------------------------------------ System Capabilities Overview of Features The VAXstation 4000 workstation offers all the advantages of an integrated computing environment based on Digital Equipment Corporation's VAX architecture. The Model 90 system offers the following features: · Desktop computing · Industry-standard personal productivity tools · Transparent access to local or distributed applications and resources · An optional DECwindows user interface that provides a consistent, windows-style of interaction in any application · 16, 32, 64, 80, or 128 megabytes of memory Your VAXstation 4000 Model 90 System 1-1 System Capabilities · A variety of options for increasing storage capacity, as well as adding communications, memory, enhanced graphics, and other capabilities to your system · Standard Ethernet and ThinWire Ethernet ports for connection to a DECnet network · A password security feature for additional system security The VAXstation 4000 Model 90 System Figure 1-1 shows a fully configured system. Figure 1-1 Your VAXstation 4000 Model 90 System 1-2 Your VAXstation 4000 Model 90 System System Components ------------------------------------------------------------ System Components Components Shipped Listed below are the basic components of your system. Figure 1-2 shows each component. ! System unit " Monitor # Keyboard $ Universal strain relief strap % System power cord & Monitor power cord ' Loopback connector ( Monitor video cable ) One T-connector and two terminators +> Network label +? Mouse with mousepad +@ Documentation Your VAXstation 4000 Model 90 System 1-3 System Components System Components Figure 1-2 shows all the basic components of your system. Figure 1-2 System Components 1-4 Your VAXstation 4000 Model 90 System System Components Front of System Unit Figure 1-3 shows the ports, switches, and indicators on the front of the system unit. Table 1-1 explains the function of each. Figure 1-3 Front of System Unit Your VAXstation 4000 Model 90 System 1-5 System Components Front Components Table 1-1 describes the ports, switches, and indicators on the front of the system unit. Table 1-1 Components: Front of System Unit ------------------------------------------------------------ Number Feature Function ------------------------------------------------------------ ! On/Off switch Power switch for system unit (shown in Figure 1-3 in off (O) position). " Front door Protects switches. # Headset jack For audio output to a headset. (software controlled) $ Audio speaker switch Turns speaker on (down) and off (up). % Halt button Used to put the system into console mode. & Alternate console switch Set to the up position to select a terminal as an alternate console for testing purposes, or to the down position to return to normal use of the workstation monitor. ' Diagnostic lights Show status of the system during diagnostic tests. (See Chapter 5.) ------------------------------------------------------------ 1-6 Your VAXstation 4000 Model 90 System System Components Back of System Unit Figure 1-4 shows the ports, switches, and indicators on the back of the system unit. Table 1-2 explains the function of each. Figure 1-4 Back of System Unit Your VAXstation 4000 Model 90 System 1-7 System Components Component Descriptions Table 1-2 describes the ports, switches, and indicators on the back of the system unit. Table 1-2 Components: Back of System Unit ------------------------------------------------------------ Number Feature Function ------------------------------------------------------------ ! SCSI port Used to connect Small Computer System Interface (SCSI) peripheral devices to the system unit. Your system comes with a SCSI terminator pre-installed. Remove this terminator if you attach external options to the system unit or expansion boxes. " Monitor video port Used to connect the monitor video cable. # Monitor power port Used to connect the monitor power cord. $ System power port Used to connect the system unit power cord. % Remote mouse/ keyboard port Used to connect the remote mouse and keyboard cable. & Mouse port Used to connect the mouse cable. ' Keyboard port Used to connect the keyboard cable. ( Printer/ communications port (TTA3) Used primarily to connect a printer or hardcopy terminal through an RS423 cable. OpenVMS does not support modems on this port. ) Communications/ printer port (TTA2) Used primarily to connect an asynchronous communications device such as a modem, through an RS232 cable. The secondary use is to attach a printer or hardcopy terminal. (continued on next page) 1-8 Your VAXstation 4000 Model 90 System System Components Table 1-2 (Cont.) Components: Back of System Unit ------------------------------------------------------------ Number Feature Function ------------------------------------------------------------ +> Standard Ethernet port Used to connect to a standard Ethernet network. +? Network switch Used to select ThinWire Ethernet or standard Ethernet networking options. Move the switch to the left for standard Ethernet or right for ThinWire Ethernet. +@ ThinWire Ethernet port Used to connect to a ThinWire Ethernet network. ------------------------------------------------------------ ------------------------------------------------------------ Available Options Options Table 1-3 lists the internal and external options for the VAXstation 4000 Model 90. Internal options must be installed inside the system unit or in an expansion box. External options, including the BA46 storage expansion box and peripheral devices, such as printers and modems, can be attached by a cable to the system unit. Your VAXstation 4000 Model 90 System 1-9 Available Options An ``X'' in Table 1-3 indicates that the option can be installed in either the system unit or an expansion box. Table 1-3 VAXstation 4000 Devices and Options ------------------------------------------------------------ Option System Unit Expansion Box ------------------------------------------------------------ RZ23L, RZ24, RZ24L, RZ25 fixed disk drives X RZ56, RZ57, RZ58 fixed disk drives X RX26 diskette drive X RRD42 compact disc drive X X TZK10 cartridge tape drive X X TLZ06 (RDAT) cassette tape drive X X TZ30 tape drive X MS44L-AA or MS44-CA memory modules X TURBOchannel option X DSW21 synchronous communications adapter X LCSPX 8-plane graphics board X SPXg 8-plane high-resolution color board X SPXgt 24-plane high-resolution board X ------------------------------------------------------------ 1-10 Your VAXstation 4000 Model 90 System Available Options External options for the VAXstation 4000 Model 90 include: · Button box (programmable function keyboard) · Dial box · Floor stand · Headset · Multiple-box rack · Printer · Remote cable option · Tablet Ordering Options Contact your Digital sales representative for more information about ordering any of these options. Installing Options To install options in the system unit, refer to the VAXstation 4000 Options Installation Guide. To install options in the BA46 expansion box, refer to the BA46 Storage Expansion Box Owner 's Guide, which is shipped with the expansion box. Your VAXstation 4000 Model 90 System 1-11 2 ------------------------------------------------------------ Installing Your VAXstation 4000 Introduction This chapter explains how to install the standalone system, run system start-up tests, and record information about your system. Chapter Topics This chapter covers the following topics: · Installing Your System · Putting Your System in Console Mode · Recording Information About Your System Installing Your VAXstation 4000 2-1 Installing Your System ------------------------------------------------------------ Installing Your System Installation Overview Table 2-1 lists the steps you take to install your VAXstation 4000 Model 90 system. The remaining pages in this section explain and illustrate these steps in detail. Table 2-1 Installation Steps for Your VAXstation 4000 Model 90 System ------------------------------------------------------------ 1. Connect the loopback and T-connector to the system unit. 2. Connect the mouse and keyboard to the system unit. 3. Attach the monitor cable to the system unit and the back of the monitor. 4. Attach the monitor power cable to the system unit and the back of the monitor. 5. Connect the system power cord to the system unit and a power outlet. ------------------------------------------------------------ Assemble the T-connector Follow the arrows in Figure 2-1 to assemble the T-connector. Figure 2-1 Assembling the T-connector 2-2 Installing Your VAXstation 4000 Installing Your System Attach the Loopback and T-connector Follow Figure 2-2 to attach the loopback connector ! and the T-connector ". Turn the T-connector to the right after you connect it to the system unit. Figure 2-2 Attaching the Loopback and T-connector Installing Your VAXstation 4000 2-3 Installing Your System Connect the Mouse and Keyboard Follow Figure 2-3 to connect the mouse cable ! and the keyboard cable " to the system unit. Figure 2-3 Connecting the Mouse and Keyboard 2-4 Installing Your VAXstation 4000 Installing Your System Attach the Monitor Cables Follow Figure 2-4 to attach the monitor video cable ! and the monitor power cord " to the system unit. Make sure you align the connectors in the monitor video cable; the alignment for the LCSPX connector is opposite of the alignment for the SPXg and SPXgt connectors. Figure 2-4 Attaching the Monitor Cable Recommended Power Source Digital recommends the system unit as the power source for the monitor power cable. If you need a longer cable, order the remote cable kit, described in the VAXstation 4000 Options Installation Guide. Installing Your VAXstation 4000 2-5 Installing Your System Universal Strain Relief Strap Follow Figure 2-5 to attach the notched end of the universal strain relief strap ! to the green (G) BNC connector " on the monitor video cable, and the other end under the cable junction block #. This strap reduces strain on the video cables. Figure 2-5 Attaching the Universal Strain Relief Strap 2-6 Installing Your VAXstation 4000 Installing Your System Attach the Monitor Video Cable Follow Figure 2-6 to attach the BNC connectors of the monitor video cable to the back of the monitor. Monochrome monitor ------------------------------------------------------------ : Section ! of Figure 2-6 shows the back of a monochrome monitor. Attach only the middle cable. Color monitor ------------------------------------------------------------ : Section " of Figure 2-6 shows the back of a color monitor. Attach from left to right, the red, green, and blue cables. Figure 2-6 Attaching the Monitor Cable to the Monitor Video In/Video Out Connectors If your monitor has Video In and Video Out connectors, connect the cable to the Video In connector. Installing Your VAXstation 4000 2-7 Installing Your System Attach the Monitor Power Cord Follow Figure 2-7 to attach the monitor power cord ! to the back of the monitor. Figure 2-7 Attaching the Monitor Power Cord 2-8 Installing Your VAXstation 4000 Installing Your System Factory Installed Software Sticker A yellow sticker covering the power connection on the back of your system unit indicates that you have OpenVMS factory installed software. (If you do not have a sticker, the configuration you ordered did not support factory installed software.) Remove the sticker shown in Figure 2-8 before you go to the next step. Figure 2-8 OpenVMS Factory Installed Software Sticker See VMS Factory Installed Software for VAXstation 4000 Workstations, shipped with your system, for more information about factory installed software. Installing Your VAXstation 4000 2-9 Installing Your System Connect the System Power Cord Follow Figure 2-9 to attach the system power cord to the back of the system unit. Plug the other end of the system power cord into a power outlet. Figure 2-9 Attaching the System Power Cord This completes the system installation. If you are installing an expansion box, or other external options, complete those installations before turning on your system and running system start-up tests. 2-10 Installing Your VAXstation 4000 Installing Your System Turn On ( | ) Your System Monitor ------------------------------------------------------------ : Turn on your monitor first. See your monitor guide for details about monitor features. System Unit ------------------------------------------------------------ : Press the On/Off switch ! to the on ( | ) position, as shown in Figure 2-10. Figure 2-10 On/Off Switch You should hear a series of beeps, and see the diagnostic lights illuminate. They indicate that the system is being tested. Installing Your VAXstation 4000 2-11 Installing Your System Successful Start-Up Display As each system test completes, the status bar $ fills. The more memory you have, the longer the start-up tests take. When all tests complete, without errors, the status bar fills completely, and the console prompt (>>>) % displays, as shown in Figure 2-11. Figure 2-11 Successful Start-Up Display ! CPU type and firmware version number " Ethernet hardware address # Memory size For more information about system start-up tests refer to Chapter 5. 2-12 Installing Your VAXstation 4000 Putting Your System in Console Mode ------------------------------------------------------------ Putting Your System in Console Mode Console Mode In console mode, your system is controlled by the console subsystem, rather than the operating system. Your system enters console mode before the operating system has been started, or whenever the operating system is interrupted, for example, when the halt button is pressed. Halt Button If the status bar successfully fills, and the console prompt (>>>) does not display on your screen, open the door on the front of the system unit and press the halt button, as shown in Figure 2-12. The console prompt should appear. Figure 2-12 Press Halt Button for Console Mode See Using the Password Security Feature in Chapter 4 to set up the console security feature. Installing Your VAXstation 4000 2-13 Recording Information About Your System ------------------------------------------------------------ Recording Information About Your System Why Record Information? It is helpful to record specific system information in case you need to provide information to your system manager or your Digital service representative. Where to Find Information Table 2-2 shows examples of the system information you should record for future reference. Table 2-2 Your System Information ------------------------------------------------------------ Information Example How to find the information ------------------------------------------------------------ Date of installation DEC-08-92 Record this on installation day. Serial number AB226048OT Read from the label on the rear of the system unit. Model number VS49K-CF Read from the label on the rear of the system unit. Ethernet hardware address 08-00-2B-04-03-12 Enter the SHOW ETHERNET command and press the Return key at the console prompt ( >>> ). CPU type and firmware version number KA49-A Vn.n Enter the SHOW CONFIG command and press the Return key at the console prompt ( >>> ). Then read the first line of the display. (continued on next page) 2-14 Installing Your VAXstation 4000 Recording Information About Your System Table 2-2 (Cont.) Your System Information ------------------------------------------------------------ Information Example How to find the information ------------------------------------------------------------ Error line ??001 9 NI 0172 Enter the SHOW CONFIG command and press the Return key at the console prompt ( >>> ). SCSI ID 0 RZ24 Enter the SHOW CONFIG command and press the Return key at the console prompt ( >>> ). (See line 10, under DEVNBR) SCSI ID 1 RZ24L Same as above SCSI ID 2 RZ25 Same as above SCSI ID 3 RZ2x Same as above SCSI ID 4 RRD42 Same as above SCSI ID 5 TZK10, RX26, or TLZ06 Same as above SCSI ID 6 INITR Same as above SCSI ID 7 (any device) Same as above ------------------------------------------------------------ Installing Your VAXstation 4000 2-15 Recording Information About Your System Attaching the Network Label Record your Ethernet hardware address and your system node name on the network label. Open the door on the front of your system and attach the network label, as shown in Figure 2-13. Figure 2-13 Attaching the Network Label 2-16 Installing Your VAXstation 4000 3 ------------------------------------------------------------ Connecting Your System to the Network Introduction This chapter explains how to connect your system to a ThinWire Ethernet network and to a standard Ethernet network. Chapter Topics After installing your system, you are ready to connect to the network. This chapter covers the following network connection tasks: · Verifying the Ethernet Subsystem · Connecting to the Network · Verifying the Ethernet Connection · Removing a System from ThinWire Ethernet Connecting Your System to the Network 3-1 Verifying the Ethernet Subsystem ------------------------------------------------------------ Verifying the Ethernet Subsystem Steps to Verify Before connecting to a network, you need to verify that the Ethernet subsystem (the Ethernet controller chip on the system board) is operating properly by following these steps: 1. Turn on ( | ) your system. The light on the back of the Ethernet loopback connector should come on. The start-up display, shown in Figure 3-1, appears on the screen. Figure 3-1 Start-Up Display If the console prompt (>>>) does not appear on your screen, press the halt button. 3-2 Connecting Your System to the Network Verifying the Ethernet Subsystem 2. Enter the following command at the console prompt: >>> TEST NI ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ When the status bar fills and the message OK displays on the screen, the system's Ethernet subsystem is working and verification is complete. If the screen displays a pair of question marks (??), there is an error. For more information about the error, see Interpreting System Start-Up Displays in Chapter 5. ------------------------------------------------------------ Connecting to the Network Connecting to Standard Ethernet Follow these steps to connect your system to the standard Ethernet network: 1. If the console prompt is not on your screen, press the halt button. 2. Turn off (O) the system unit. 3. Move the network switch (! of Figure 3-2) to the left. 4. Remove the Ethernet loopback connector and store it for future diagnostic testing. Connecting Your System to the Network 3-3 Connecting to the Network Figure 3-2 Network Switch 5. Connect the standard Ethernet cable to the standard Ethernet port on the back of the system unit, as shown in Figure 3-3. 3-4 Connecting Your System to the Network Connecting to the Network Figure 3-3 Ethernet Cable in Ethernet Port 6. Move the sliding lock on the port to the left to secure the connection. 7. Connect the other end of the Ethernet cable to the network outlet. Connecting to ThinWire Ethernet Follow these steps to connect your system to the ThinWire Ethernet network: 1. Move the network switch to the right (see Figure 3-2) for the location of the switch. 2. Remove the T-connector from the system unit. 3. Remove one or both terminators from the T-connector: If your workstation is the last one on the ThinWire cable, you need to leave one terminator attached to terminate the network connection. Otherwise, remove both. Connecting Your System to the Network 3-5 Connecting to the Network 4. Add the ThinWire cable to the T-connector in place of the terminators, as shown in Figure 3-4. Figure 3-4 Adding ThinWire Cable 5. Reconnect the T-connector to the ThinWire Ethernet port on the back of the system unit, as shown in Figure 3-5. Figure 3-5 Reconnecting ThinWire Cable 3-6 Connecting Your System to the Network Connecting to the Network 6. Attach one end of the ThinWire Ethernet cable to the DECconnect faceplate, on the wall, as shown in Figure 3-6. Figure 3-6 Connecting to the DECconnect Faceplate 7. Check that the T-connector at the other end of the ThinWire cable is firmly attached to the ThinWire port on the back of your system unit. Connecting Your System to the Network 3-7 Verifying the Ethernet Connection ------------------------------------------------------------ Verifying the Ethernet Connection Verify Command Follow these steps to verify your Ethernet connection: 1. Turn on ( | ) your system. 2. Enter the following command at the console prompt: >>> TEST NI ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ When the status bar fills and the message OK displays on the screen, the system's Ethernet subsystem is working and verification is complete. If the screen displays a pair of question marks (??), there is an error. See Interpreting System Start-Up Displays in Chapter 5. 3-8 Connecting Your System to the Network Removing a System from ThinWire Ethernet ------------------------------------------------------------ Removing a System from ThinWire Ethernet Caution: Follow Shutdown Procedures Before halting or turning off your system, see the operating system documentation for shutdown procedures. If your system is part of a networked work group, do not turn off, halt, or restart the system without notifying work group members. Removal Steps Follow these steps to remove your system from ThinWire Ethernet: 1. Turn off (O) the system unit. 2. Disconnect the center of the T-connector directly from the back of the system unit. Figure 3-7 shows the correct way to remove a T-connector from an inactive ThinWire segment. 3. Reattach the terminators to the T-connector and reconnect the T-connector to the system unit. Figure 3-7 Removing the T-connector from the System Connecting Your System to the Network 3-9 4 ------------------------------------------------------------ Using Your System Introduction After you install your system, you are ready to use your system. This chapter explains how to turn your system off and on, display the system configuration, use commands in console mode, and set the password security feature. Chapter Topics This chapter covers the following tasks: · Turning Your Workstation On and Off · Starting Your System · Reviewing Your System Configuration · Using Console Commands · Using the Password Security Feature · Moving Your System Using Your System 4-1 Turning Your Workstation On and Off ------------------------------------------------------------ Turning Your Workstation On and Off Turning On the Monitor Turn on ( | ) the monitor with the monitor On/Off switch. The monitor power does not turn on when the system unit is turned on. Turning On Your System Turn on your other equipment in the following order: 1. Printer and modem 2. Storage and expansion boxes 3. System unit Adjusting Your Monitor Adjust the brightness and contrast on your monitor to the level most comfortable to you. For more information, refer to your monitor documentation. Turning Your System Off Before halting or turning off your system, see the operating system documentation for shutdown procedures. If your system is part of a networked work group, do not turn off, halt, or restart the system without notifying work group members. 1. Halt the system by pressing the halt button behind the door on the front of the system unit. 2. Turn off your equipment in the following order: a. System unit b. Storage and expansion boxes c. All peripherals, such as printers and modems d. Turn off (O) the monitor with the monitor On/Off switch. The monitor power does not turn off when the system unit is turned off.) 4-2 Using Your System Starting Your System ------------------------------------------------------------ Starting Your System Enter the Boot Command If your workstation has an internal disk drive, and has the boot device set, you can run the OpenVMS factory installed software by entering the following command at the console prompt (>>>): >>> BOOT ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ The OpenVMS factory installed software asks you to confirm the system time and date and to enter password information. Follow the instructions as they appear on the screen. When the factory installed software completes, your system will display the operating system user interface. For additional help see VMS Factory Installed Software for VAXstation 4000 Workstations. ------------------------------------------------------------ Reviewing Your System Configuration Console Mode Once your operating system display appears on the screen, you are in program mode. To review your system configuration, you will need to enter console mode by pressing the halt button. When you press the halt button, your system enters console mode and the console prompt (>>>) displays on the screen. The SHOW CONFIG Command At the console prompt, you can enter the SHOW CONFIG command to access information about your system components, such as memory size and SCSI IDs. Figure 4-1 shows a sample of the SHOW CONFIG command and the resulting display. The text that follows explains each line in the SHOW CONFIG display. Using Your System 4-3 Reviewing Your System Configuration Figure 4-1 SHOW CONFIG Display ! CPU type and firmware version number " Ethernet hardware address # System memory size in megabytes $ Column headings for lists of device numbers (DEVNBR) and device names (DEVNAM). The INFO column indicates whether or not a particular device is functioning properly and gives other status information. % The graphics line shows the type of graphics board installed in the system. Table 4-1 explains the graphics board mnemonics. 4-4 Using Your System Reviewing Your System Configuration Table 4-1 Graphics Board Mnemonics ------------------------------------------------------------ Mnemonic Meaning ------------------------------------------------------------ LCSPX High resolution, color,8-plane SP3D High resolution, color, 8- or 24-plane, 3-D ------------------------------------------------------------ & The memory line displays the total number of megabytes of memory installed in the eight memory slots. It also lists the type of memory board in each 4-board set. ' Lines in the INFO column give information for a particular device. If a device is functioning properly, the message OK appears next to the device mnemonic. If not, an error message appears in the form of two question marks (??). ( The SCSI line gives information for each SCSI device installed: the SCSI ID number and the type of SCSI device. Using Your System 4-5 Reviewing Your System Configuration Error Messages Problems with a particular device are indicated by a pair of question marks (??) in the column next to the mnemonic of the device or system component, as shown in Figure 4-2. Figure 4-2 SHOW CONFIG Display with Error ! Error indicator " ID number of failed device # Error number See the section Troubleshooting System Components in Chapter 6 for probable causes and solutions to problems. 4-6 Using Your System Using Console Commands ------------------------------------------------------------ Using Console Commands The commands that you enter at the console prompt (>>>) let you display information about your system, as well as set and test certain components. Using HELP To see a list of the console commands, enter HELP at the console prompt (>>>) and press the Return key. SHOW Commands Table 4-2 lists the information you can display with each SHOW command. Table 4-2 SHOW Commands ------------------------------------------------------------ If you want to know: Enter this command: ------------------------------------------------------------ The default boot flag SHOW BFLG The default boot device SHOW BOOT The system configuration SHOW CONFIG The boot devices available SHOW DEVICE Extended error information SHOW ERROR The status of system exerciser tests SHOW ESTAT The hardware Ethernet address SHOW ETHER Which default startup tests to perform SHOW FBOOT The system's default recovery action SHOW HALT The keyboard language selected SHOW KBD How much memory your system has SHOW MEM If the password enable bit is on SHOW PSE The SCSI bus host ID number SHOW SCSI ------------------------------------------------------------ Using Your System 4-7 Using Console Commands SET Commands Table 4-3 lists the function of each SET command. Table 4-3 SET Commands ------------------------------------------------------------ To set this feature: Enter this command: ------------------------------------------------------------ Set boot flags SET BFLG Define the boot device SET BOOT Set the recovery action SET HALT Select the keyboard language SET KBD Enable the password bit SET PSE Enable the password security feature SET PSWE Set the SCSI bus host ID number SET SCSI ------------------------------------------------------------ TEST Commands Table 4-4 list the tests you can run using each TEST command. Table 4-4 TEST Commands ------------------------------------------------------------ To run this test: Enter this command: ------------------------------------------------------------ Self-test on sound chip TEST AUD Self-test on cache TEST CACHE Self-test on serial line controller TEST DZ Self-test on floating point unit TEST FPU Self-test on interval timer TEST IT Self-test on graphics option TEST LCSPX or SP3D Self-test on system memory TEST MEM Self-test on network interface TEST NI Self-test on nonvolatile RAM TEST NVR Self-test on device controller TEST SCSI Self-test on interrupt controller and Ethernet ID ROM TEST SYS System exerciser TEST 100 ------------------------------------------------------------ 4-8 Using Your System Using the Password Security Feature ------------------------------------------------------------ Using the Password Security Feature Restricted Access In normal operation, console mode ( >>> ) allows all console operator privileges, such as HALT, SET, DEPOSIT, and EXAMINE. Some companies require that direct access to memory and kernel system operation be restricted to authorized personnel only. To implement this restricted access, a password security feature is available for console access and operation. With this feature certain console commands, called privileged commands, are accessible only to users possessing the correct password, which enables the security feature. Privileged Console Commands The privileged console commands are: BOOT (with parameters) DEPOSIT EXAMINE FIND HALT INITIALIZE LOAD MICROSTEP NEXT REPEAT SET SHOW START UNJAM X @ Privileged console commands also include any commands that modify memory and registers, or that transfer control of the CPU from the console monitor to another program such as BOOT or START. Using Your System 4-9 Using the Password Security Feature Nonprivileged Console Commands The console commands listed in Table 4-5 are accessible without access to privileged mode. Table 4-5 Nonprivileged Console Commands ------------------------------------------------------------ LOGIN Allows password entry to the privileged state. BOOT (no parameters) Allows you to boot from the default boot device. CONTINUE Allows continued operations in a nonprivileged mode if you inadvertently push the halt button. ! Allows comment text that will not be acted on by the system. ------------------------------------------------------------ Choosing a Security Password Your system arrives from the factory with the password security feature disabled. If you want to use this feature, choose a string of exactly 16 hexadecimal characters (0 through 9, A through F), and store your password in a secure place. Setting Your Password Follow the instructions in Table 4-6 to set your password. Table 4-6 Setting Your Password ------------------------------------------------------------ Step You enter: System displays: ------------------------------------------------------------ 1 SET PSWD PSWD0>>> 2 your password (No screen echo) PSWD2>>> 3 your password (No screen echo) >>> ------------------------------------------------------------ Note: ------------------------------------------------------------ If the password you enter is incorrect, your system displays: ?34 ILL PSWD. Return to step 1. Your password is preserved in nonvolatile memory, which means that the password is saved even if the system unit power is turned off. 4-10 Using Your System Using the Password Security Feature Enabling the Security Feature After you enter and confirm the password, you must enable the password security feature as described in Table 4-7. Table 4-7 Enabling the Password Security Feature ------------------------------------------------------------ Step You enter: System displays: ------------------------------------------------------------ 1 SET PSE 1 >>> 2 LOGIN PSWD0>>> 3 your password (No screen echo) >>> ------------------------------------------------------------ Note: ------------------------------------------------------------ If the password you enter is incorrect, your system displays: ?34 ILL PSWD. Return to step 2. Disabling the Security Feature To disable the password security feature, enable the security feature and follow the instructions in Table 4-8. Table 4-8 Disabling the Password Security Feature ------------------------------------------------------------ Step You enter: System displays: ------------------------------------------------------------ 1 SET PSE 0 PSE=00000000 ------------------------------------------------------------ Changing the Password To change the password, enable the security feature and follow the instructions in Table 4-9. Table 4-9 Changing Your Console Password ------------------------------------------------------------ Step You enter: System displays: ------------------------------------------------------------ 1 SET PSWD PSWD0>>> 2 old password PSWD1>>> 3 new password PSWD2>>> 4 new password >>> ------------------------------------------------------------ Your password is now preserved. If the password you enter is incorrect, your system displays: ?34 ILL PSWD. Return to step 1. If you forget your password, call your Digital service representative. Using Your System 4-11 Moving Your System ------------------------------------------------------------ Moving Your System Shutting Down See the operating system documentation for shutdown procedures. If your system is part of a networked work group, do not turn off, halt, or restart the system without notifying work group members. Take the following steps to repack the system to move it to another location: 1. Shut down the operating system. 2. Halt the system by pressing the halt button behind the door on the front of the system unit. 3. Turn off the system unit. 4. Turn off (O) the equipment in the following order: a. System unit b. Expansion boxes c. All peripheral devices such as printers and modems d. Monitor Turning Off the Monitor Turn off (O) the monitor with the monitor On/Off switch. The monitor power does not turn off when the system unit is turned off. Packing Material If you saved the original packaging material when you first unpacked the system, reuse that material to pack the equipment for the move. If you did not save the original packing material, be sure the equipment is packed securely in heavy boxes and wrapped in material that will prevent breakage. Reconnecting Your System After you move the system, connect all device cables to the system unit before connecting any device or the system unit to the power outlets. (See Chapter 2.) 4-12 Using Your System 5 ------------------------------------------------------------ Testing System Components Introduction A variety of tests can be run on your system to verify that the components are working properly and to identify the source of any problems. This chapter explains how to perform and interpret the results of system tests and how to reboot your system after testing. Chapter Topics This chapter covers the following topics: · Interpreting System Start-Up Displays · Interpreting Diagnostic Lights · Testing System Components · Resuming Normal Operation After Testing ------------------------------------------------------------ Interpreting System Start-Up Displays Start-Up Display Every time you turn on your system, it runs start-up tests that display important information. These tests check the components in your system and fill a status bar on the monitor screen (see Figure 5-1.) When the status bar fills completely, and the system prompt (>>>) displays, you know the tests were successful. Testing System Components 5-1 Interpreting System Start-Up Displays Start-Up Display with Error Message If there is a problem, the start-up test display shows an error message. Figure 5-1 shows the elements in a start-up display containing an error message. Figure 5-1 Start-Up Display with Error Message ! ID number " Component number # Component mnemonic $ Error message number 5-2 Testing System Components Interpreting System Start-Up Displays Use the following tables to understand each piece of an error message. ! The ID Number See Table 5-1 to identify the ID number of the part that your Digital service representative needs to replace. Table 5-1 ID Numbers and Definitions ------------------------------------------------------------ ID Number Definition ------------------------------------------------------------ 001 System board 002 Keyboard 003 Mouse 004 Monitor 010-019 Graphics option 020-029 Communications option 030-039 Bus adapters 040-047 Memory boards: 040 is slot 0A, 041 is slot 1E, and so on 100-170 SCSI controller: 100 is SCSI ID #0, 110 is SCSI ID #1, and so on ------------------------------------------------------------ Testing System Components 5-3 Interpreting System Start-Up Displays " and # The Faulty Component The error message contains a component number " and component mnemonic #, which identify the faulty device or component in your system. Table 5-2 explains what the numbers and mnemonics mean. Table 5-2 Component Numbers and Mnemonics ------------------------------------------------------------ Component Number Component Mnemonic Component ------------------------------------------------------------ 1 NVR Nonvolatile random access memory (RAM) 2 LCSPX or SP3D Graphics coprocessor 3 DZ Serial line controller 4 CACHE High-speed memory 5 MEM Memory 6 FPU Floating point unit 7 IT Interval timer 8 SYS Miscellaneous system board hardware 9 NI Network interface 10 SCSI SCSI controller 11 AUD Sound chip 12 COMM Communications device 13 TCA TURBOchannel option ------------------------------------------------------------ 5-4 Testing System Components Interpreting System Start-Up Displays $ The Error Message Number Table 5-3 explains some common error message numbers you may see when you turn on your system or run a test. If you see other messages that you do not understand, call your Digital service representative. Table 5-3 Error Messages ------------------------------------------------------------ Error Message Number Meaning Action ------------------------------------------------------------ 0012 Battery check test has failed. Plug your system in and try start-up again after 24 hours. 0030 There is no loopback connector. Be sure the loopback connector is securely installed. 0062 LK401 keyboard test has failed. Unplug and replug your keyboard, then try again. 0166 The SCSI terminator is not secure. Secure the SCSI terminator. 0172 The T-connector or Ethernet loopback connector is not secure or is not installed. Secure or install the T- connector and loopback. Check all network cables. ------------------------------------------------------------ If an error persists, enter the SHOW ERROR command to display a coded explanation. Call your Digital service representative to report the code. Testing System Components 5-5 Interpreting Diagnostic Lights ------------------------------------------------------------ Interpreting Diagnostic Lights Where the Lights Are The diagnostic lights on the front of the system unit indicate the status of the system as it is powering up. After the power is turned on but before any commands are entered, the lights are all on. After all tests have run successfully, all lights are off. There are eight recessed diagnostic lights on the front of your system unit, as shown in Figure 5-2. Figure 5-2 Diagnostic Lights 5-6 Testing System Components Interpreting Diagnostic Lights What the Lights Mean Diagnostic lights that remain on after system tests are complete indicate an error. Table 5-4 lists some common errors indicated by the diagnostic light patterns. In these patterns, X=on and O=off. Table 5-4 Diagnostic Light Patterns of Common Problems ------------------------------------------------------------ Pattern 7654 3210 Meaning ------------------------------------------------------------ OOXO OOOX The LCSPX video RAM (random access memory) test failed. OOXO OXXO The LCSPX virtual address test failed. OOXX OXOX The LK401 test failed. OOXX OXXO The mouse test failed. OXOX OOOO The memory byte mask test failed. XOOX OOOX The network address test failed. XOOX XOXO The loopback test failed. XOXO OXOX The SCSI minimal device test failed. XOOX XOOX The ThinWire terminator is not properly connected. ------------------------------------------------------------ Testing System Components 5-7 Testing System Components ------------------------------------------------------------ Testing System Components Testing a Single Component To test a particular device or component in your system, follow these steps: 1. Use Table 5-2 to find the number or mnemonic for the device or component you want to test. 2. Before halting or turning off your system, see the operating system documentation for shutdown procedures. If your system is part of a networked work group, do not turn off, halt, or restart the system without notifying work group members. 3. Put the system in console mode (>>>) by pressing the halt button behind the door on the front of the system unit. 4. Enter TEST followed by a space and either the number or mnemonic of the device or component to be tested; then press the Return key. Example For example, to test nonvolatile random access memory (RAM), enter: >>> TEST NVR ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ or >>> TEST 1 ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ At first, the system displays an unfilled status bar. As the test runs, the status bar fills. When the test is successful, the status bar fills completely and the console prompt displays. 5-8 Testing System Components Testing System Components Testing Several Components If you want to test a consecutive series of devices or components, enter TEST followed by the first and last numbers or mnemonics of the series separated by a colon, and press the Return key. Example For example, to test the first five components listed in Table 5-2, enter: >>> TEST NVR:MEM ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ or >>> TEST 1:5 ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ A single empty bar displays and fills in as each test runs. If a device or component fails the test, an error message line displays. See Table 5-3 for a list of common error messages. Testing All Components If you change the system configuration, test all devices and components by entering one of the following commands: >>>TEST 1:11 ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ or >>>TEST NVR:AUD ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ Testing All Components Simultaneously The system exerciser, which resides in the read-only memory (ROM), is a tool that simultaneously tests the internal and external devices and components, except for sound chips. The test takes several minutes to complete, depending on the number of SCSI devices. It does not write on any medium. Testing System Components 5-9 Testing System Components Using the System Exerciser To use the system exerciser, follow these steps: 1. To test a drive, insert media in the SCSI devices on your system that support removable media. For example: · If your system has an RRD42 compact disc drive, insert a disc. · If your system has a TZK10 tape drive, insert a TZK10 tape cartridge. · If your system has a TLZ06 tape drive, insert a TLZ06 tape cartridge. · If your system has an RX26 diskette drive, insert a formatted diskette. If the diskette is not formatted, the test will fail. To format the diskette, enter the following command: >>> INIT/DENSITY=xx ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ Where xx represents: ED (Extra density) DD (Double density) HD (High density) The diskette in the drive must match the density that you specify with the INIT command. If you have a diskette that is different from what you specify in the command, the command fails and the following message displays: Invalid media format 2. Before halting or turning off your system, see the operating system documentation for shutdown procedures. If your system is part of a networked work group, do not turn off, halt, or restart the system without notifying work group members. 3. Put the system in console mode by pressing the halt button behind the front door of the system unit. 4. Enter the following command: >>> TEST 100 ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ 5-10 Testing System Components Testing System Components Interrupting the System Exerciser If you interrupt the system exerciser with a ------------------------------------------------------------ ------------------------------------------------------------ CTRL/C ------------------------------------------------------------ ------------------------------------------------------------ , the sytem displays a question that asks if you want to review the tests that were run until the interrupt (1= yes), or exit the test (0= no review). When you return to the console prompt, enter the following UNJAM command: >>> U ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ If you do not enter the UNJAM command after a system exerciser interrupt, you will get an error message when you try to run more tests. Testing System Components 5-11 Testing System Components Successful Test Figure 5-3 shows a successful system exerciser test. As testing progresses, each status bar fills. Figure 5-3 Successful System Exerciser Test ! Elapsed time " User environment # Firmware version number $ Component number % Component mnemonic & Status bar 5-12 Testing System Components Testing System Components Unsuccessful Test Figure 5-4 shows a system exerciser display with an error line for component number 10, the SCSI controller. Figure 5-4 System Exerciser Display with an Error Line ! Error line " Component number # Error indicator $ Component mnemonic % ID of failed device & Error code ' Time of failure If you see any error messages in the system exerciser display, write down the firmware version number and the error number and call your Digital service representative for assistance. Testing System Components 5-13 Testing System Components Requesting a Test Summary When the test finishes, the system exerciser displays the following question, asking if you want to see a summary display of the system test: SYT_DISPLY_SMRY ('1' = Y) If you answer 1 (yes), the system displays a test summary. The summary, shown in Figure 5-5, always begins with the graphics device. To see the display of each subsequent device, press the Return key. Figure 5-5 Test Summary Display With Error ! Error location (two lines) " Drive number # Test expected to read this code $ Test actually read this code 5-14 Testing System Components Testing System Components Requesting No Test Summary Display If you answer 0 (no), a display similar to the following is shown after a few minutes: ?06 HLT INST PC=00003C17 PSL=00000000 >>> This display tells you that the test has halted and the system has returned you to the console prompt ( >>> ). After Any Testing When you complete any diagnostic test, enter the UNJAM command, as follows: >>> U ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ Resuming Normal Operation After Testing Two Ways to Reboot While you are running any of the tests or procedures in this chapter, you are in console mode. To resume normal operation of the system, you must reenter program mode. There are two ways to enter program mode: 1. Enter BOOT at the console prompt (>>>) and press the Return key. The system searches each device in turn for the operating system software. If you set the boot device using the SET BOOT command, the system goes directly to the device set as the default boot device. 2. Enter BOOT followed by a space and one of the OpenVMS device mnemonics listed in Table 5-5. Testing System Components 5-15 Resuming Normal Operation After Testing Device Mnemonic Table 5-5 OpenVMS Device Mnemonic ------------------------------------------------------------ Device and Location OpenVMS Device Mnemonic ------------------------------------------------------------ Fixed disk in system unit or expansion box (SCSI ID 0-7) DKAx00 1 Mass storage on remote system EZA0: Tape (SCSI ID 0-7) MKAx00 1 ------------------------------------------------------------ 1 x = the SCSI ID for a particular device. ------------------------------------------------------------ Example For example, to boot the system software immediately from the fixed disk at SCSI ID 3, enter: >>> BOOT DKA300 ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ Depending on which boot device you use, after a short time, you will see a DECwindows window or the OpenVMS username prompt. See Appendix A for information on setting your system parameters. 5-16 Testing System Components 6 ------------------------------------------------------------ Handling Problems Introduction If you should encounter a problem with your system, use the information in this chapter to diagnose and solve the problem. Chapter Topics This chapter explains the following procedures: · Checking Cable Connections · Troubleshooting System Components · Reporting Problems to Your Digital Service Representative Handling Problems 6-1 Checking Cable Connections ------------------------------------------------------------ Checking Cable Connections Shut Down the System To check all the cable connections, follow these steps: 1. Refer to your operating system documentation for shutdown procedures before turning off your system and peripheral devices. Failure to meet this requirement can cause loss of user data or system failure. 2. Turn off (O) the system unit. 3. Turn off (O) all expansion boxes and all peripheral devices such as printers and modems. 4. Turn off (O) the monitor using the monitor On/Off switch. The monitor power does not turn off when the system unit is turned off. Check Cable Connections Check that the following cables are securely connected at both ends: · Monitor video cable · Monitor power cord · System unit power cord · Expansion box connector cable and SCSI bus terminator · Expansion box power cord · Keyboard cable (the end at the system unit only) · Mouse/tablet cable (the end at the system unit only) · Network cables (Loopback, T-Connector, Terminators) At this point, all equipment should be turned off. 6-2 Handling Problems Checking Cable Connections Turn System Back On Turn the equipment back on ( | ) in the following order: · Monitor · Peripheral devices (printers, modems) · Storage expansion box · System unit Adjust the brightness and contrast on your monitor. If you still have a problem, refer to the following troubleshooting tables. ------------------------------------------------------------ Troubleshooting System Components Troubleshooting Overview Use the information in the following tables to diagnose a problem and determine a solution. Check the symptom column first to locate the problem you are experiencing and then try the solutions suggested in the last column. Handling Problems 6-3 Troubleshooting System Components System Unit Table 6-1 provides information for solving system unit problems. Table 6-1 Problems with the System Unit ------------------------------------------------------------ Symptom Possible Cause Suggested Solution ------------------------------------------------------------ System unit fan is off. Power cord is not connected. Check the power cord connections at both ends. Wall outlet may not be working. Try a different outlet or try an electrical device that you know works in that outlet. Power cord is faulty. Replace the power cord. Power supply or fan has failed. Contact your Digital service representative. Start-up display contains an error message. A module or internal cable may not be properly installed, or may be defective. Check the seating of modules and cables depending on the fault indicated by the error message. (See the VAXstation 4000 Options Installation Guide.) System does not boot. Your software is not installed. See your software documentation for installation instructions. Default recovery action is set to halt. Change the default recovery action to boot the system from the system disk. See Appendix A. Software problem. Contact your Digital service representative. ------------------------------------------------------------ 6-4 Handling Problems Troubleshooting System Components Monitor Table 6-2 lists suggestions for solving monitor problems. Table 6-2 Problems with the Monitor ------------------------------------------------------------ Symptom Possible Cause Suggested Solution ------------------------------------------------------------ Start-up display does not appear after 2 minutes. Monitor is not turned on. Check the monitor On/Off switch; be sure it is on ( | ). Power cord is not connected. Check that the monitor power cord is connected at both ends. Monitor video cable is not connected. Check that the monitor video cable is connected at both ends. Monitor brightness and contrast controls are set too low for the screen display to be seen. Adjust the monitor brightness and contrast controls. If necessary, refer to your monitor guide for more information. Alternate console switch is in the wrong position. Turn off the power. Change the alternate console switch to the down (off) position. Use a small pointed object to set the switch, but do not use a pencil; the graphite will damage the switch. See Appendix A for more information. Turn the power back on. Monitor is defective. Contact your Digital service representative, or turn to Appendix A for instructions on testing with an alternate console. Monitor screen is frozen. Press Ctrl/F2 to restore screen. ------------------------------------------------------------ Handling Problems 6-5 Troubleshooting System Components Mouse/Tablet Table 6-3 lists suggestions for solving problems with your mouse or tablet. Table 6-3 Problems with the Mouse or Tablet ------------------------------------------------------------ Symptom Possible Cause Suggested Solution ------------------------------------------------------------ Mouse or optional tablet pointer does not appear on screen, or monitor does not respond to pointing device commands. CTRL F3 was pressed by mistake, and system pointer mode is off. Press CTRL F3 again to restart the pointer mode. Pointing device cable is installed incorrectly or is loose. Turn off the system. Disconnect and then reconnect the cable to reset the device. The system is in console mode; no pointer appears on the screen. Change the system to program mode by entering BOOT at the console prompt ( >>> ). Pointing device is faulty. Replace the pointing device, or call your Digital service representative. ------------------------------------------------------------ Keyboard Table 6-4 lists suggestions for solving keyboard problems. Table 6-4 Problems with the Keyboard ------------------------------------------------------------ Symptom Possible Cause Suggested Solution ------------------------------------------------------------ Keys do not work. Hold Screen key is active (the Hold Screen light is on). Press the Hold Screen key to release the hold on the screen. Keyboard cable is loose or not connected. Check the keyboard cable connection to the system unit. Keyboard has failed. Replace the keyboard. If the problem persists, contact your Digital service representative. CTRL F2 was pressed to enter console mode. Unplug the keyboard and reconnect it. ------------------------------------------------------------ 6-6 Handling Problems Troubleshooting System Components Network Table 6-5 lists suggestions for solving network problems. Table 6-5 Problems with the Network ------------------------------------------------------------ Symptom Possible Cause Suggested Solution ------------------------------------------------------------ NI error message is displayed when testing Ethernet. Network switch is not set properly. Check that the network switch is in the correct position, left for standard Ethernet, and right for ThinWire Ethernet. If you are not using Ethernet, move the network switch to the left, toward standard Ethernet. No ThinWire T-connector with terminators, or standard Ethernet loopback connector was installed. Attach a ThinWire T-connector with terminators or standard Ethernet loopback connector, or replace the ThinWire terminator with an active network cable. Terminator is missing from network. If you remove a ThinWire cable, replace it with a terminator and retest the Ethernet. Cable connection is loose. Check that all connections on the Ethernet segment are secure. If the problem persists, contact your Digital service representative. ------------------------------------------------------------ Audio Table 6-6 lists suggestions for handling audio problems. Table 6-6 Audio Problems ------------------------------------------------------------ Symptom Possible Cause Suggested Solution ------------------------------------------------------------ No audio tone (beep) sounds when the system is turned on. Audio speaker switch is in the up (off) position. Move the switch to the down (on) position. If the problem persists, contact your Digital service representative. ------------------------------------------------------------ Handling Problems 6-7 Reporting Problems to Your Digital Service Representative ------------------------------------------------------------ Reporting Problems to Your Digital Service Representative Before You Call If you followed the corrective actions described in this chapter yet continue to have problems with your system, take the following steps before you call your Digital service representative: 1. Write down the serial and model numbers of your system to give to your Digital service representative. You will find these numbers behind the door on the front of the system unit or on the rear panel of the system unit. For example, Model number: VS49K-CF, and Serial number: AB226048OT. 2. Make notes about the state of your system when the problem occurred. 3. Be prepared to read information from the screen and to enter commands at the keyboard while you talk to your Digital service representative. 4. Your Digital service representative may ask you which lights are on. Eight recessed diagnostic lights on the front of the system unit come on when you turn on the system, as shown in Figure 5-2. Write down the status of these lights. 6-8 Handling Problems A ------------------------------------------------------------ Alternate Start-Up Procedures Introduction This appendix explains how to set alternate start-up procedures, including how to reboot your system and change the default recovery action. It also explains how to change your keyboard language setting. Appendix Topics This appendix covers the following procedures: · Changing the Keyboard Language · Setting the Default Boot Device · Changing the Default Recovery Action · Setting the Default Boot Flags · Using the Alternate Console Feature Alternate Start-Up Procedures A-1 Changing the Keyboard Language ------------------------------------------------------------ Changing the Keyboard Language Turning Off Your System Before halting or turning off your system, see the operating system documentation for shutdown procedures. If your system is part of a networked group, do not turn off, halt, or restart the system without notifying work group members. Steps to Change Keyboard Language To operate your system in a different language, you need to change the language of your keyboard as follows: 1. Put the system in console mode by pressing the halt button behind the door on the front of the system unit. 2. At the console prompt ( >>> ), enter SET KBD and press the Return key. The Keyboard Language Menu and the selected default display, as shown in Figure A-1. Figure A-1 Changing the Keyboard Language 3. Select a language from the menu. For example, to change from English (3) to Italian (9), enter 9 at the console prompt and press the Return key. A-2 Alternate Start-Up Procedures Setting the Default Boot Device ------------------------------------------------------------ Setting the Default Boot Device The Default Boot Device When your system arrives from the factory, it is set to boot from a particular disk drive, which is the default boot device. You can change the default boot device to any of the devices listed in Table A-1, but the operating system software must reside on that device. Table A-1 shows the OpenVMS device mnemonics assigned to each of the possible devices. Table A-1 OpenVMS Device Mnemonic ------------------------------------------------------------ Device and Location OpenVMS Device Mnemonic ------------------------------------------------------------ Fixed disk in system unit or expansion box (SCSI ID 0-7) DKAx00 1 Mass storage on remote system EZA0: Tape (SCSI ID 0-7) MKAx00 1 ------------------------------------------------------------ 1 x = the SCSI ID for a particular device. ------------------------------------------------------------ Changing the Boot Device Before halting or turning off your system, see the operating system documentation for shutdown procedures. If your system is part of a networked group, do not turn off, halt, or restart the system without notifying work group members. To reset the default boot device, follow these steps: 1. Put the system in console mode by pressing the halt button behind the door on the front of the system unit. 2. At the console prompt ( >>> ), enter SET BOOT and the OpenVMS device name of the boot device where the software will reside, then press the Return key. Alternate Start-Up Procedures A-3 Setting the Default Boot Device Example For example, to set the boot device to be the fixed disk at SCSI ID 3 in the system unit, enter: >>> SET BOOT DKA300 ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ Short-Cut If you are powering your system off and on frequently, you may want to shorten the time required for the boot process. The following command shortens the time for the self-test, but remember that the amount of time depends partly on the amount of memory you have on the system: >>> SET FBOOT 1 ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ Changing the Default Recovery Action Default Recovery Options The default recovery action is the system's automatic response when you turn on the system or after the system recovers from an operating system software failure. The options you have for setting this default recovery action are listed and explained in Table A-2. Table A-2 Values for Recovery Action ------------------------------------------------------------ Halt Value Recovery Action Result Action ------------------------------------------------------------ 1 Automatic restart After system failure, the operating system restarts. If that fails, the system reboots. None 2 Automatic reboot The system halts and then the operating system software reboots. None 3 Automatic halt The system halts after start-up, and the console prompt displays. Enter BOOT 1 ------------------------------------------------------------ 1 Enter BOOT or BOOT plus the OpenVMS device mnemonic for the device where the operating system software resides. ------------------------------------------------------------ A-4 Alternate Start-Up Procedures Changing the Default Recovery Action Changing Default Recovery Action Before halting or turning off your system, see the operating system documentation for shutdown procedures. If your system is part of a networked group, do not turn off, halt, or restart the system without notifying work group members. To change the default recovery action, follow these steps: 1. Put the system in console mode by pressing the halt button behind the front door of the system unit. 2. At the console prompt ( >>> ), enter the following: SHOW HALT ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ The value for the current default recovery action is displayed as follows: >>> HALT 00000001 3. Enter a new default recovery value from those listed in Table A-2. In the following example, the new default recovery value is 2, which automatically reboots the operating system software after a system failure: >>> SET HALT 2 ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ Alternate Start-Up Procedures A-5 Setting the Default Boot Flags ------------------------------------------------------------ Setting the Default Boot Flags Who Should Set the Boot Flag The SET BFLG (boot flag) command lets you define parameters that the system will use each time it boots. This command should be used only by developers and other technical users who need and understand its capabilities. Most users will not need to change the boot flag setting. Setting the Boot Flag Default boot flags should be preset for the operating system installed on your system. Consult the VAXstation 4000 Model 90 Service Information for the default boot flag number (a hexadecimal number of up to 8 characters). Before halting or turning off your system, see the operating system documentation for shutdown procedures. If your system is part of a networked group, do not turn off, halt, or restart the system without notifying work group members. To reset the default boot flags: 1. Put the system in console mode by pressing the halt button behind the front door of the system unit. 2. At the console prompt, enter: >>> SET BFLG new_default-bootflag-number ------------------------------------------------------------ ------------------------------------------------------------ Return ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ Using the Alternate Console Feature If Monitor Screen Is Blank If your monitor is not functioning, you can use the alternate console feature to run tests. By connecting a terminal to the printer/communications port, you can run tests on the graphics board or use the system exerciser to determine the cause of the monitor problem. A-6 Alternate Start-Up Procedures Using the Alternate Console Feature Connecting a Terminal as an Alternate Console To connect a terminal, follow these steps: 1. Halt the system by pressing the halt button behind the front door of the system unit. 2. Turn off (O) the system unit. 3. Move the alternate console switch behind the door on the front of the system unit to the up (on) position using a small pointed object. (Do not use a pencil; the graphite will damage the switch.) When the switch is in the up position, the terminal functions as an alternate console. The printer/communications serial port is now a terminal port. 4. Attach one end of an RS423 serial cable to the printer/ communications port on the back of the system unit and the other end of the serial cable to the serial port on the alternate console terminal. 5. Turn on ( | ) the terminal. 6. Check the baud rate of the terminal, which should be set to 9600 baud. See your terminal documentation for additional information on adjusting the baud rate. 7. Turn on ( | ) the system unit. 8. Adjust the brightness and contrast on your terminal. 9. If the console prompt (>>>) does not appear on the alternate console screen, press the Break key on the alternate console terminal keyboard. If it still does not appear, call your Digital service representative. Alternate Start-Up Procedures A-7 B ------------------------------------------------------------ DSW21 Synchronous Communications Adapter Installation Information for the United Kingdom Appendix Topics This appendix includes installation information required for the United Kingdom only. It covers the following topics: · Cables · Equipment Between the DSW21 Adapter and a Digital Circuit · Host Power Rating · Approved Service Specifications · BABT Host-Independent Approvals ------------------------------------------------------------ Cables Approval The DSW21 Synchronous Communications Adapter is approved for direct connection to a particular digital circuit. This approval includes an interconnecting cable with mating connectors that conform to the British standard BS6623, parts 1 and 4. If the adapter is connected to the service with anything other than its own approved cables, those cables must benefit from relevant general approval NS/G/1235/100009 and/or conform with any other application requirements. DSW21 Synchronous Communications Adapter Installation Information for the United Kingdom B-1 Cables Safety Warning Conditions The port indicated by the label "SAFETY WARNING: See Instructions for Use" does not provide sufficient isolation to satisfy the requirements of the relevant parts of standard BS6301. Any product connected to this port must meet one of the following conditions: · Be covered by the general approval NS/G/1234/J/100003 · Have been approved to the relevant parts of standard BS6301 · Have previously been evaluated against British Telecom (Post Office) Technical Guide 2 or 26 and given permission to attach Any other use of this product invalidates approval. Direct or indirect interconnection of the port marked "SAFETY WARNING: See Instructions for Use" as indicated above, whether the ports are marked or not, may produce hazardous conditions on the network. You should obtain advice from an engineer before making such a connection. ------------------------------------------------------------ Equipment Between the DSW21 Adapter and a Digital Circuit Equipment Requirements If any other equipment, including cables or wiring, is to be connected between the DSW21 Synchronous Communications Adapter and any digital Postal Telephone and Telegraph (PTT) circuit, that equipment must conform as follows: · The overall transmission characteristics of all other equipment must not have any material effect on the electrical conditions between the equipment and the digital circuit. B-2 DSW21 Synchronous Communications Adapter Installation Information for the United Kingdom Equipment Between the DSW21 Adapter and a Digital Circuit · All other equipment must comprise only the following: ------------------------------------------------------------ Approval, which may be subject to limitations on its use, for the purpose of connection between it and a particular digital circuit. ------------------------------------------------------------ Cable or wiring that complies with the standard installation code for the equipment or other requirements that may be applicable. ------------------------------------------------------------ Host Power Rating Module Power Since the host and the approved equipment are proprietary to Digital Equipment Corporation, Digital controls the power source and sink ratings. All available host enclosures have the power capacity to supply all module permutations. Digital has designed all permutations of the host configuration to operate within the limits of the host power rating, as shown in Table B-1. Table B-1 Module Power ------------------------------------------------------------ Parameter Minimum Type Maximum Units ------------------------------------------------------------ Power consumption - 6.7 8.01 Watts Current at each DC voltage +5 V +12 V -12 V .60 .12 .08 .75 .15 .10 Amperes Amperes Amperes ------------------------------------------------------------ DSW21 Synchronous Communications Adapter Installation Information for the United Kingdom B-3 Approved Service Specifications ------------------------------------------------------------ Approved Service Specifications UK Compliance Table B-2 lists the British Approvals Board for Telecommunications (BABT) service specifications for UK compliance. Note the following relative to this table: · The total length of cable must not exceed 27 feet (823 cm). · Use only cables that have been approved for the DSW21 Synchronous Communications Adapter. You can use other approved cables if they conform to the NS/G/1235/100009 standard and any other special requirements. Table B-2 BABT Approved Service Specifications for the DSW21 Synchronous Communications Adapter for UK Compliance ------------------------------------------------------------ Service Category Interface Type Service Requirements Data Rate Public Telecomm Operators 1 Physical Electrical BT Hull MCL ------------------------------------------------------------ 1 X.21bis V.24/V.28 ISO 2110, BS.6623: part1, 1985 2400 bps 4800 bps 9600 bps 19200 bps Yes Yes Yes No Yes Yes Yes No Yes Yes Yes Yes Approved adapter cable: BC19V-02 Approved extension cable: BC22F-25 (25 feet, 762 cm) 2 X.21bis V.35 ISO 2593, BS.6623: part4, 1986 48K bps 56K bps 64K bps Yes Yes No Yes No No Yes Yes Yes Approved adapter cable: BC19X-02 Approved extension cable: BC19L-25 (25 feet, 762 cm) ------------------------------------------------------------ 1 BT -- British Telecommunications plc. Hull -- Kingston Communications (Hull) plc. MCL -- Mercury Communications Limited. ------------------------------------------------------------ B-4 DSW21 Synchronous Communications Adapter Installation Information for the United Kingdom BABT Host-Independent Approvals ------------------------------------------------------------ BABT Host-Independent Approvals Approval Criteria When the DSW21 Synchronous Communications Adapter is approved by BABT, it can be installed only in an approved host with approved attachments. For approval, the host and attachments must be either of the following: · Type-approved for the DSW21 In other words, the equipment is built exactly as the models that were originally approved. · Marked with or supplied with a statement that the host is supplied under General Approval Number NS/G/1234/ J/100003. This requirement applies to equipment supplied after 1st March 1989. Exceptions are the 64-pin connector that plugs into the host's expansion slot, and clearance and creepage distances listed in Table B-3. DSW21 Synchronous Communications Adapter Installation Information for the United Kingdom B-5 BABT Host-Independent Approvals Clearance Table B-3 lists the clearance and creepage distances that must be maintained between the DSW21 Synchronous Communications Adapter and other parts of the host, including other expansion cards. Also listed are creepage distances, which apply when you install the DSW21 in a controlled environment. Table B-3 Clearance and Creepage Distances ------------------------------------------------------------ Clearance X mm Creepage Y mm Voltage Used or Generated by Other Parts of the Host or Expansion Card Vrms or Vdc ------------------------------------------------------------ 2.0 2.4 (3.8) 1 Up to 50 2.6 3.0 (4.8) Up to 125 4.0 5.0 (8.0) Up to 250 4.0 6.4 (10.0) Up to 300 ------------------------------------------------------------ 1 The distances shown in parentheses apply in an uncontrolled environment where heat, humidity, and temperature may fluctuate. ------------------------------------------------------------ B-6 DSW21 Synchronous Communications Adapter Installation Information for the United Kingdom BABT Host-Independent Approvals Checking Creepage Distances You can check creepage distances by measuring the distance between adjacent parts, as shown in Figure B-1, where: X Indicates the clearance distance, that is, the shortest distance in air between two points. Y Indicates the creepage path between the same two points, that is, the continuous path along the surface. Figure B-1 Creepage Distance If in doubt, you should seek the advice of a telecommunications safety engineer. Warning: Approval Invalidated Failure to install the DSW21 Synchronous Communications Adapter in accordance with these instructions will invalidate the approval. DSW21 Synchronous Communications Adapter Installation Information for the United Kingdom B-7 C ------------------------------------------------------------ Model 90 System Specifications Appendix Topics This appendix lists the following VAXstation 4000 Model 90 system hardware specifications: · Dimensions · Electrical · Storage · Operating conditions · Nonoperating conditions Model 90 System Specifications C-1 System Specifications ------------------------------------------------------------ System Specifications Dimensions Table C-1 lists the dimensions of the VAXstation 4000 system unit. Table C-1 System Unit Dimensions (Diskless System) ------------------------------------------------------------ Weight Height Width Depth ------------------------------------------------------------ 4½ kg 10.9 cm 48.2 cm 40 cm (10 lb) (4.3 in) (19.0 in) (15½ in) ------------------------------------------------------------ Electrical Specifications Table C-2 lists the electrical specifications for the VAXstation 4000 system. Table C-2 System Electrical Specifications ------------------------------------------------------------ Input voltage Automatically adjusting AC input from 100-120 VAC to 220-240 VAC Frequency range 47 to 63 Hz Watts 286 maximum, with no monitor 465 maximum, with monitor ------------------------------------------------------------ C-2 Model 90 System Specifications System Specifications General Specifications Table C-3 lists the specifications of the VAXstation 4000 system components. Table C-3 System Component Specifications ------------------------------------------------------------ Component Description ------------------------------------------------------------ Processor KA49 CPU DRAM 16-MB minimum, 128-MB maximum (no on-board memory) ROM memory 512 KB flash programmable Optional fixed disks One or two 209-MB, or 426-MB integral 3½-inch fixed disks Optional RX26 diskette drive 4-MB 3½-inch diskette drive Optional RRD42 compact disc 600-MB 5¼-inch compact disc drive Optional TZK10 525-MB, 5¼-inch quarter-inch cartridge (QIC) tape drive Optional TLZ06 4.0-GB, 5¼-inch cartridge tape drive Optional expansion boxes BA46 storage expansion box or the BA42 storage expansion box Interfaces 1 SCSI port, 1 ThinWire Ethernet port, 1 standard Ethernet port, and serial ports such as printer/communications, communications/printer, synchronous communications, and TURBOchannel ------------------------------------------------------------ Model 90 System Specifications C-3 System Specifications Storage Specifications Table C-4 lists the environmental specifications for the VAXstation 4000 system. Table C-4 System Storage Specifications ------------------------------------------------------------ Temperature range 5°C to 50°C (41°F to 122°F) Relative humidity 10% to 95% (noncondensing) Altitude 0 to 2400 m (0 to 8000 ft) Maximum wet bulb temperature 32°C (90°F) Minimum dew point 2°C (36°F) ------------------------------------------------------------ Operating Conditions Table C-5 lists the operating conditions for the VAXstation 4000 system. Table C-5 VAXstation 4000 Operating Conditions ------------------------------------------------------------ Temperature range 15°C to 32°C (59°F to 90°F) Temperature change rate 11°C/hr (52°F/hr) maximum Relative humidity 20%-80% (noncondensing) Altitude 2400 m (8000 ft) Maximum wet bulb temperature 28°C (82°F) Minimum dew point 2°C (36°F) ------------------------------------------------------------ Nonoperating Conditions Table C-6 lists the nonoperating conditions for the VAXstation 4000 system. Table C-6 VAXstation 4000 Nonoperating Conditions ------------------------------------------------------------ Temperature range -40°C to 66°C (-40°F to 151°F) Relative humidity 95% @ 66°C (151°F) (may condense) Altitude 4900 m (16,000 ft) Maximum wet bulb temperature 28°C (82°F) Minimum dew point 2°C (36°F) ------------------------------------------------------------ C-4 Model 90 System Specifications ------------------------------------------------------------ Index A ------------------------------------------------------------ Alternate console setting the baud rate, A-7 switch location, 1-6 using, A-6 Alternate start-up procedures setting, A-1 to A-6 Audio speaker switch function of, 1-6 B ------------------------------------------------------------ Beeps during system start-up, 2-11 BOOT command, 5-15, A-4 after running tests, 5-15 automatic, A-3 Boot devices changing, A-3 names of, A-3 Boot flags setting default, A-6 C ------------------------------------------------------------ Cables monitor, attaching (fig.), 2-5 power, monitor (fig.), 2-8 troubleshooting, 6-2 Commands BOOT, 5-15, A-3 diagnostic, 4-8 HELP, 4-7 Commands (cont'd) privileged, 4-9 SET, 4-8 SHOW, 4-7 TEST, 4-8 Communications/printer port function of, 1-8 Components identifying faulty, 5-1 shipped (fig.), 1-4 Configuration full system (fig.), 1-2 Console mode getting help, 4-7 security feature, 4-9 Conventions used in this guide, xii D ------------------------------------------------------------ DECconnect faceplate connecting to (fig.), 3-7 Default boot devices changing, A-3 names of, A-3 Default boot flags setting, A-6 Default recovery action setting, A-4 Device testing, 5-8 Devices available (tab.), 1-10 Diagnostic lights for a ThinWire error, 5-6 Index-1 Diagnostics commands, 4-8 self tests, 5-12 start-up, 5-1 system exerciser, 5-9 tests, 5-8 Digital service representative, 6-8 DKAx00 device, 5-15, A-3 E ------------------------------------------------------------ Error messages in the system exerciser display, 5-13 start-up display, 5-7 Ethernet connecting the Standard cable (fig.), 3-5 connecting the ThinWire cable (fig.), 3-6 network verification, 3-8 subsystem verification, 3-2 Expansion box booting from a fixed disk in, 5-16, A-3 EZA0 device, 5-15, A-3 F ------------------------------------------------------------ Factory installed software sticker figure of, 2-9 function of, 2-9 Fan troubleshooting, 6-3 Features, 1-1 Fixed disks as default boot device, 5-15, A-3 boot device names, A-3 H ------------------------------------------------------------ Halt button, 5-7 function of, 1-6 Halt recovery action, A-4 Hardware address logging, 2-14 Hardware specifications electrical, C-2 environmental, C-4 system unit, C-1 Headset jack function of, 1-6 HELP command, 4-7 I ------------------------------------------------------------ ID numbers of system components, 5-3 K ------------------------------------------------------------ Keyboard changing language, A-2 connecting (fig.), 2-4 Keyboard port function of, 1-8 L ------------------------------------------------------------ Languages changing, A-2 Lights diagnostic, 5-6 troubleshooting, 5-6 Loopback connector attaching (fig.), 2-3 figure of, 1-3 M ------------------------------------------------------------ MKAx00 device, 5-15, A-3 Mnemonics for components, 5-4 graphics board (tab.), 4-5 Monitor troubleshooting, 6-3 Monitor cable attaching (fig.), 2-5 Monitor power cord attaching (fig.), 2-8 ordering a longer, 2-5 Monitor power port function of, 1-8 Monitor video cable attaching (fig.), 2-7 figure of, 1-3 Index-2 Monitor video port function of, 1-8 Mouse connecting (fig.), 2-4 Mouse port function of, 1-8 N ------------------------------------------------------------ Network connecting to, 3-2 label, attaching (fig.), 2-16 troubleshooting, 6-7 Network switch function of, 1-9 Node logging, 2-14 O ------------------------------------------------------------ On/off switch location of, 1-6 OpenVMS operating system See also Operating system boot device names, 5-15, A-3 Operating system software boot device names, 5-15, A-3 Options available (tab.), 1-10 confirming installation, 5-1 installing, 1-11 ordering, 1-11 P ------------------------------------------------------------ Password changing, 4-11 setting, 4-10 Password security feature disabling, 4-11 enabling, 4-11 Power cord for monitor (fig.), 1-3 for system (fig.), 1-3 system, attaching (fig.), 2-10 Power-up See Start-up Privileged console commands, 4-9 Problem solving system exerciser, 5-9 Problems identifying, 5-7 reporting, 6-8 troubleshooting table, 6-3 R ------------------------------------------------------------ Reboot recovery action, A-4 Remote booting boot device name, 5-15, A-3 Remote mouse/keyboard port function of, 1-8 Reporting problems, 6-8 Restarting your system, 5-15 RRD42 compact disc drive boot device name, 5-15 S ------------------------------------------------------------ SCSI devices boot names, A-3 SCSI IDs default setup, A-3 SCSI port function of, 1-8 Self-tests commands for, 5-8 restarting after, 5-15 system exerciser, 5-12 Service, 6-8 SET BFLG command, A-6 SET commands, 4-8 SET FBOOT command, A-4 SET HALT command, A-4 SET KBD command, A-2 SHOW commands, 4-7 SHOW CONFIG line descriptions, 4-4 screen display with error (fig.), 4-6 Index-3 Specifications, C-1 electrical, C-2 environmental, C-4 system, C-3 Standard Ethernet connecting (fig.), 3-5 port function, 1-9 Start-up error messages, 5-7 screen display (fig.), 3-2 successful test display, 5-9 system exerciser, 5-12 tests, 5-1 troubleshooting, 6-3 Start-up display mnemonics, 5-4 Status bar at start-up, 5-1 Sticker for factory installed software (fig.), 2-9 System address label, 2-16 features, 1-1 turning off, 6-2 turning on, 6-3 System exerciser display example, 5-12 restarting after running, 5-15 successful test, 5-11 test with errors, 5-15 testing media, 5-9 System power cord attaching (fig.), 2-10 System power port function of, 1-8 System unit diagnostic lights, 5-6 dimensions, C-2 environmental specifications, C-4 front view (fig.), 1-5 hardware specifications, C-1 rear view (fig.), 1-7 troubleshooting, 6-3 T ------------------------------------------------------------ T-connector assembling (fig.), 2-2 attaching (fig.), 2-3 removing (fig.), 3-9 Tape drives boot device name, 5-15, A-3 TEST 100 command, 5-10 TEST command, 4-8 ThinWire Ethernet connecting (fig.), 3-6 improper connection error, 5-6 port function, 1-9 removing, 3-9 Troubleshooting lights (LEDs), 5-6 monitor, 6-3 self-tests, 5-7 start-up error messages, 5-7 system exerciser, 5-9 system unit, 6-3 Turning off the system sequence for, 6-2 Turning on the system sequence for, 6-3 U ------------------------------------------------------------ Universal strain relief strap attaching (fig.), 2-6 figure of, 1-3 V ------------------------------------------------------------ Video in/Video out connectors using, 2-7 VMS See OpenVMS Index-4 How to Order Additional Documentation ------------------------------------------------------------ Technical Support If you need help deciding which documentation best meets your needs, call 800-DIGITAL (800-344-4825) and press 2 for technical assistance. Electronic Orders If you wish to place an order through your account at the Electronic Store, dial 800-234-1998, using a modem set to 2400- or 9600-baud. You must be using a VT terminal or terminal emulator set at 8 bits, no parity. If you need assistance using the Electronic Store, call 800-DIGITAL (800-344-4825) and ask for an Electronic Store specialist. Telephone and Direct Mail Orders From Call Write U.S.A. DECdirect Phone: 800-DIGITAL (800-344-4825) Fax: (603) 884-5597 Digital Equipment Corporation P.O. Box CS2008 Nashua, NH 03061 Puerto Rico Phone: (809) 781-0505 Fax: (809) 749-8377 Digital Equipment Caribbean, Inc. 3 Digital Plaza, 1st Street Suite 200 Metro Office Park San Juan, Puerto Rico 00920 Canada Phone: 800-267-6215 Fax: (613) 592-1946 Digital Equipment of Canada Ltd. 100 Herzberg Road Kanata, Ontario, Canada K2K 2A6 Attn: DECdirect Sales International ---------- Local Digital subsidiary or approved distributor Internal Orders 1 (for software documentation) DTN: 264-3030 (603) 884-3030 Fax: (603) 884-3960 U.S. Software Supply Business Digital Equipment Corporation 10 Cotton Road Nashua, NH 03063-1260 Internal Orders (for hardware documentation) DTN: 264-3030 (603) 884-3030 Fax: (603) 884-3960 U.S. Software Supply Business Digital Equipment Corporation 10 Cotton Road Nashua, NH 03063-1260 ------------------------------------------------------------ 1 Call to request an Internal Software Order Form (EN-01740-07). Reader 's Comments VAXstation 4000 Model 90 Series Owner's and System Installation Guide EK-VAXOG-IN. B01 ------------------------------------------------------------ Your comments and suggestions help us improve the quality of our publications. Thank you for your assistance. I rate this manual's: Excellent Good Fair Poor Accuracy (product works as manual says) ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ Completeness (enough information) ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ Clarity (easy to understand) ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ Organization (structure of subject matter) ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ Figures (useful) ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ Examples (useful) ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ Index (ability to find topic) ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ Page layout (easy to find information) ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ I would like to see more/less ------------------------------------------------------------ ------------------------------------------------------------ What I like best about this manual is ------------------------------------------------------------ ------------------------------------------------------------ What I like least about this manual is ------------------------------------------------------------ ------------------------------------------------------------ I found the following errors in this manual: Page Description ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ Additional comments or suggestions to improve this manual: ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ For software manuals, please indicate which version of the software you are using: ------------------------------------------------------------ ------------------------------------------------------------ Name/Title ------------------------------------------------------------ Dept. ------------------------------------------------------------ Company ------------------------------------------------------------ Date ------------------------------------------------------------ Mailing Address ------------------------------------------------------------ ------------------------------------------------------------ Phone ------------------------------------------------------------ ------------------------------------------------------------ Do Not Tear - Fold Here and Tape ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ d TM ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ BUSINESS REPLY MAIL FIRST CLASS PERMIT NO. 33 MAYNARD MASS. ------------------------------------------------------------ ------------------------------------------------------------ POSTAGE WILL BE PAID BY ADDRESSEE ------------------------------------------------------------ ------------------------------------------------------------ No Postage Necessary If Mailed in the United States ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ DIGITAL EQUIPMENT CORPORATION Information Design and Consulting PKO3-1/D30 129 PARKER STREET MAYNARD, MA 01754-2198 ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ Do Not Tear - Fold Here ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------ ------------------------------------------------------------