_ DEC-O-LOG for VR260

_ DOL, VR260-I001, VR260 MONITOR MAY 86

PROBLEM: Customer may object to the glare from the VR260 CRT face.  Some 
VR260's reflect more ambient light than others.  Early VR260's below S/N's 
AB537xxxxx have been shipped without Antiglare treatment.  Deflection 
modules burnt or discolored where the yoke plug from the ITC Assembly plugs 
into the module.  ITC Assemblies (CRT, yoke, bezels) that are in whole 
options below S/N's AB524xxxxx have been shipped with improper yoke plug 
pins.

FIELD EFFECTIVITY: Retrofit VR260's with S/N's AB537xxxxx and below with 
Antiglare and where applicable with proper yoke connector.  S/N's 
AB524xxxxx and below contain an ITC Assembly without Antiglare and with a 
defective yoke connector.  The defective yoke connector can result in 
premature deflection board failure.  S/N's AB525xxxxx through AB537xxxxx 
contain an ITC without Antiglare but have the proper yoke connector.

QUICK CHECK: If the CRT shows fingerprinting smudging easily, the monitor 
should contain the antiglare treated CRT and does not have to be replaced.  
Monitors below S/N AB524xxxxx containing the ITC Assembly with defective 
yoke pins may cause the width of the display to be jittery and change 
erratically and intermittently.


FCO KIT ORDERING:
EQ-01381-01  FCO, PARTS
FA-04663-01  FCO only