_ FCO VT330-I001, Firmware bugs in V1.1 +-----------------------------------------------------------------------------+ | | | _ _ _ _ _ _ _ Level of Urgency Page 1 | || | | | | | | | +--+ of 4 | ||d|i|g|i|t|a|l| FCO |I | | ||_|_|_|_|_|_|_| +--+ | |_____________________________________________________________________________| | | | FIELD CHANGE ORDER Number: VT330-I001 | |_____________________________________________________________________________| | Applicability: This "I" coded FCO calls for the replacement of the current | | ROM cartridge, labeled "VT330/340 V1.1", with the new ROM cartridge, | | labeled "VT330/340 V2.1" and 70-22623-04 REV. C01. See Removal/Replacement | | procedure. This FCO implements ECO: VT330-XX-ML003. | | | | | This revised FCO supersedes Revision A released 28 June 1988. | | || It has been revised to correct the EQ number from EQ-01514-01 | | | to EQ-01513-01 located on the cover page and page 4. | |_____________________________________________________________________________| | Problem/Symptom: The current VT330/340 Text/Graphics terminals contain | | firmware version V1.1. However, several problems have been identified as | | firmware bugs and have been corrected in version V2.1. | |_____________________________________________________________________________| | Quick Checks: See page 2. | | | |_____________________________________________________________________________| | Compatibility/Prerequisite FCO: None | Est. Time to Install: | | | 0.1 hour | |___________________________________________________|_________________________| | Special Tools or Test Equipment: None | | | |_____________________________________________________________________________| | FCO Parts Information | |_____________________________________________________________________________| | Order by Quantity: Part Number: Description: | | FCO Kit#: | | EQ-01513-01 1 70-22623-04 ROM cartridge | | EK-VT3XX-RN-003 VT330/340 Release | | Notes | | FA-04809-01 1 FCO document | |_____________________________________________________________________________| |EQ Kit Variation System/Option Applic: N/A | |_____________________________________________________________________________| | Approvals | |_____________________________________________________________________________| | CSSE Engineer | F.S. Product Safety | F.S. Logistics | | Vartkes Hovsepian | William Henry | Ed Duggan | |____________________|__________________________|_____________________________| | CSSE Manager | F.S. Microfiche Libraries| Affected Population: | | Ron Francoeur | | 15,000 | |____________________| EP-FSNVX-LB VAX |____________________________ | | MicroMedia Pub. | EP-FSP11-LB PDP11 | Initial Kitting: | | Ray LeBlanc | EP-FSLCG-LB LCG | 8,000 | |____________________| EP-FSPD8-LB PDP8 |____________________________ | | Revision: | | Hardcopy Publication: | | B | VAXnotes | 8,000 | |____________________| STARS |_____________________________| | FCO Release Date | | Parts Availability: | | 12-AUG-88 | | July, 1988 | +-----------------------------------------------------------------------------+ _ _ _ _ _ _ _ | FCO VT330-I001 | | | | | | | | | |d|i|g|i|t|a|l| | PAGE 2 OF 4 |_|_|_|_|_|_|_| | | _______________________________|_________________________________________ Quick Check: Continued from page 1. 1. Visually inspect cartridge for "VT330/340 V2.1" and "70-22623-04 REV. C01" labels. 2. Enter terminal's Set-Up Directory and look for "Version V2.1" at top right-hand corner of screen. Removal and Replacement Procedure for ROM Cartridge. ************************************************************* * WARNING * * THE USE OF A GROUNDED WRIST STRAP AND A GROUNDED WORK * * SURFACE IS ESSENTIAL TO PREVENT DAMAGE TO ELECTROSTATIC * * DISCHARGE SENSITIVE DEVICES WHICH MAY NOT BE NOTICED * * IMMEDIATELY. * ************************************************************* ******************************************* * CAUTION * * AC POWER MUST BE REMOVED FROM THE * * TERMINAL BEFORE PROCEEDING. * ******************************************* 1. Turn the terminal's power switch to the OFF (0) position. 2. If the rear panel is installed, remove it as follows: a. Grasp the top of the rear panel and pull toward you. b. If there is a cable connected to the 25-pin Comm1 port, slide the panel down the cable and away from the terminal. Otherwise, lower the panel and remove from the terminal. Set the panel aside. _ _ _ _ _ _ _ | FCO VT330-I001 | | | | | | | | | |d|i|g|i|t|a|l| | PAGE 3 OF 4 |_|_|_|_|_|_|_| | | _______________________________|_________________________________________ 3. Remove the V1.1 ROM cartridge as follows: ******************************************* * CAUTION * * AC POWER MUST BE REMOVED FROM THE * * TERMINAL BEFORE PROCEEDING. * ******************************************* a. Lift the handle on the ROM cartridge. b. Remove the phillips screw on the bottom of the ROM cartridge. This screw holds the ROM cartridge to the CPU module. c. To remove the ROM cartridge, grasp the handle and pull firmly. Figure 1 _ _ _ _ _ _ _ | FCO VT330-I001 | | | | | | | | | |d|i|g|i|t|a|l| | PAGE 4 OF 4 |_|_|_|_|_|_|_| | | _______________________________|_________________________________________ 4. To install the V2.1 ROM cartridge, reverse steps a. through c. 5. Turn the terminal's power switch to the ON (1) position. 6. Ensure that the terminal completes a successful power-up self-test. 7. Update the Site Management Guide to reflect this FCO. 8. Report LARS data as per example below. Labor Activity Reporting (LARS) USA GIA EUROPE Activity: Contract W U Y Non-contract/Non-warranty F F F DEC Option VT330 VT330 VT330 Type Of Call M M M Action Taken D D I Fail Area-Module-FCO-Comments VT330-I001 VT330-I001 VT330-I001 Material Used EQ-01513-01 EQ-01513-01 EQ-01513-01 \^ VT330 \\VT330 \\VT330-I001 \\HOVSEPIAN \\1988 \\AUG \\FCO_DOCS